Extreme Networks 300-2 manual Reglatory Compliances

Reglatory Compliances

result in illegal operation and may cause harmful interference to other systems.

•This device employs a radar detection feature required for European Community operation in the 5.0 GHz band. This feature is automatically enabled when the country of operation is correctly configured for any European Community country. The presence of nearby radar operation may result in temporary interruption of operation of this device. The radar detection feature will automatically restart operation on a channel free of radar.

•The 5.0 GHz radio’s AutoChannelSelect/SmartSelect setting described in the PoE WLAN switch software manual must always remain enabled to ensure that automatic 5.0 GHz channel selection complies with European requirements. The current setting for this feature is found in the 5.0 GHz Radio Configuration Window as described in the PoE WLAN switch software manual.

•The Altitude 300-2TMwireless port with integral antenna and the Altitude 300-2TMwireless port with certified detachable antennas may be used to transmit indoors and outdoors in all countries of the European Community within the go to http://www.extremenetworks.com/go/rfcertification.htm for the most up to date limitation and restrictions.

•The Altitude 300-2TMmust be operated indoors only when using the 5150- 5350 MHz bands due to European spectrum usage rules.

•The Altitude 300-2TMwireless port with detachable antenna must only be used with Extreme Networks certified antennas.

•In Italy the end user must apply for a license from the national spectrum authority to operate this device outdoors.

•In Belgium outdoor operation is only permitted using the 2.46 - 2.4835 GHz band: Channel 13.

•In France outdoor operation is only permitted using the 2.4 - 2.454 GHz band: Channels 1 - 7.

Altitude 300-2™ Getting Started Guide 53