Extreme Networks 300-2 manual Reglatory Compliances

Reglatory Compliances

wireless port is North American, Japan, or Taiwan reglatory domains all sequential wireless port must be the same reglatory domain otherwise additional wireless port will not be allowed to come up.

NOTE

The end user is responsible to enter the proper country code for the country of intended use. Extreme Networks is not liable for improper country code configuration.

NOTE

Extreme Networks has not certified the Altitude 300-2TMwith any third party antennas. To assure compliance, use only “Extreme Networks” certified antennas.

The Poe WLAN switch will automatically configure the Wireless Access point to operate within the proper frequencies and power outputs determined by the country code entered. Incorrectly entering the country of operation may result in illegal operation and may cause harmful interference to other systems. The user is obligated to ensure the device is operating according to the channel limitations, indoor/outdoor restrictions and license requirements for each country as described in this document. Please refer to Software Installation Guide for list of country codes or go to http://www.extremenetworks.com/go/rfcertification.htm for the most up to date information.

Altitude 300-2™ Getting Started Guide 45