Reglatory Compliances
Conditions of Use in the European Community
The Altitude 300-2TMwireless port Model# 15706 and 15707 for the EU and Rest of World reglatory domain is intended to operate in all countries of the European Community. Special requirements or limitations may apply when installed in some countries of the European Union. This includes special in-country licensing and/or limited channels of operation when installed indoors or outdoors. For the most up to date restriction and limitations go to www.extremenetworks.com/go/rfcertification.htm.
WARNING!
The user / installer is responsible to ensure the Altitude 300-2TMis operated according to channel limitations, indoor / outdoor restrictions, license requirements and within power level limits for the current country of operation. A configuration utility has been provided with the PoE WLAN switch to allow the end user to check the configuration and make necessary configuration changes to ensure proper operation in accordance with the spectrum usage rules for compliance with the European R&TTE directive 1999/5/EC. See the software manual of PoE WLAN switch for detailed instructions on use of this utility.
NOTE
The Altitude 300-2TMis completely configured and managed by the PoE WLAN switch connected to the Altitude 300-2TM. Please see software manual of PoE WLAN switch to properly configure the Altitude 300-2TM.
•The Altitude 300-2TMwireless port requires the end user / installer to enter the correct country code into the PoE WLAN switch software to allow for proper configuration in conformance with European National spectrum usage laws that match the country in which the device is operating.
•After the first Altitude 300-2TMwireless port is connected to the PoE WLAN switch each additional wireless port connected will inherit the operating configuration of the first Altitude 300-2TMwireless port. The user / installer is responsibility to ensure the first Altitude 300-2TMwireless port is properly configured.
•The software within the PoE WLAN switch will automatically limit the allowable channels and output power determined by the current country code entered. Incorrectly entering the country of operation, selecting the correct indoor / outdoor setting or identifying the proper antenna used, may
52 | Altitude 300-2™ Getting Started Guide |