Advanced Playback Function, Setup Others | Integra DPC-6.1 instruction

Connecting to an Audio System and TV with COMPONENT VIDEO Inputs

■It is also possible to “split” the audio and video signals by sending the video signal to your TV set and the audio signal to an amplifier. Doing so has the advantage that you can:

•Listen to the sound of audio CDs and DVD videos in stereo (via the amplifier) or in Dolby Digital, Dolby Pro Logic Surround or DTS (see pages 12, 13);

•Enjoy a better picture quality of DVD videos on a TV equipped with Component Video inputs than would be possible via an S-video connection.

Notes

•See also the manuals of your audio amplifier and TV set for establishing the correct connections and making the required settings.

•Before connecting the DVD Changer to other equipment, be sure to turn off the power and unplug all components from the wall outlet.

•This DVD Changer outputs a very dynamic audio signal. Be sure to set the amplifier’s volume to a moderate listening level to avoid damaging your speakers due to sudden volume surges.

•Switch off the amplifier or select another input source before connecting or disconnecting the DVD Changer’s power cable. If you leave the amplifier power on, the speakers may be damaged.

Your DPC-6.1 provides several options for audio playback: you can use the analog or one of the digital audio outputs. If your amplifier only provides analog inputs, use the DPC-6.1’s ANALOG OUTPUTs and select them via the on- screen menu (“Analog 2ch”). See “Audio Settings” on page 36 for details.

Getting Started

Connections

VIDEO OUTPUT

Y	PB	PR	S VIDEO	VIDEO
	COMPONENT
ANALOG		DIGITAL
OUTPUT		OUTPUT
		COAXIAL	OPTICAL

AC INLET

Do not plug in the power cable until all connec- tions have been made.

Basic Playback

		(red)
To Y	To PB	To PR
VIDEO	VIDEO	VIDEO
OUT	OUT	OUT

Signal flow

(white)

ANALOG

AUDIO OUT

To audio inputs of the amplifier

Audio connection cable (Not supplied)

To PR video input

To PB video input

To Y video input

Component video cable (Not supplied)

Power cable (included)

To wall outlet

(See page 10)

(red)

(white)

Audio system

TV or monitor with component signal inputs

Advanced Playback Function

■COMPONENT VIDEO OUT (COLOR DIFFERENCE):

Some TVs or monitors are equipped with Color Difference inputs. Connecting the DPC-6.1 to these inputs allows you to enjoy a better picture quality. Be sure to match the DPC-6.1’s VIDEO OUTPUTs with the Component Video inputs of your TV or monitor (see the illustration).

Actual labels for the Color Difference inputs may vary depending on the TV manufacturer (e.g. Y, B-Y, R-Y, etc.). On some TVs or monitors, the color levels of the picture may be reduced slightly, or the tint may change. In such cases, adjust the TV or monitor for optimum performance.

Note:

If you place the DVD Changer near a tuner or radio, the radio reception might be distorted due to interference. In this case, locate the DPC-6.1 away from the tuner or radio.