Integra DPC-6.1 instruction manual Basic Playback, Connecting to a Wall Outlet and Powering On

Disc Skip

CAUTION

Playing back Discs Keep your fingers clear of the disc drawer as it is closing to avoid personal injury.

This section shows you the basics on how to playback a disc. Most steps in this manual need to be performed using the supplied remote controller. The relative buttons are usually indicated at the beginning of a section.

Power		Disc Skip
Standby/On
		2			Disc 1–6
	Standby/On indicator
		Open/Close	Pause	Stop	Play
	Next Selection
Power
	Repeat				CD Play
Standby/On	Dimmer Display	Disc Skip	Disc 1 Disc 2	Disc 3 Disc 4	Disc 5 Disc 6

On	Off
	Direct Digital Path	DPC-6.1
		3

Basic Playback

■Preparations

•To view a video disc, switch on your TV set and select the video input the DPC-6.1 is connected to. See also pages 10, 11 for how to connect the DVD Changer to your TV set.

•If you are also using an amplifier for separate audio playback (see pages 11, 12, 13), switch on the amplifier and select the input the DPC-6.1 is connected to.

1 -2Power		Connecting to a Wall Outlet and Powering On.				Note:
		1 Plug the power cable into a suitable wall outlet.			When you use the DPC-6.1 for the first
	On Off	2 Press the Power button on the main unit to switch it			time:
		to Standby mode.			When the DPC-6.1 is shipped from the
-3	Standby/On				factory, the Power switch is set to On
		The Standby/On indicator on the main unit lights.
					( On	Off ). Therefore, when you
		3 Press the Standby/On button on the main unit, or the			plug in the power cable to the AC
					outlet, the Standby/On indicator lights
	or	POWER button on the supplied r emote controller to
					up and the unit enters Standby mode
		switch on the DVD Changer .
	POWER				as described in Step 1- 2.
		The display lights up, and the Standby indicator
		goes dark.
2	Open/Close	Press the OPEN/CLOSE button.				Note:
		The disc drawer opens, and the disc indicator lights up.			The disc drawer can also be opened
		(See “DISC INDICATORS ATTENTION” on page 42.)			when the DVD Changer is switched
	or				off.
	OPEN/
	CLOSE
3		Place a disc in the front disc tray (DISC 1).				Notes:
					• The DPC-6.1 supports two disc sizes.
					To avoid damaging your discs or
					causing malfunction, be sure to
		DISC 2	DISC 1	DISC 6	insert the discs in the correct guide.
					• Only use DVD videos, VIDEO CDs or
				DPC-6.1
					audio CDs. Other data carriers may
		Be sure to insert the disc with the playback side down.			damage your DVD Changer and/
					or amplifier/TV set.

■Placing discs in the remaining disc trays.

Repeatedly press the DISC SKIP button on the main unit to rotate the disc drawer counter-clockwise, and place a disc in each desired tray (1–6).

4 Open/Close	Press the	OPEN/CLOSE button again.	Note:
	The disc drawer closes.		Alternatively, press one of the DISC 1–6
	Press one of the DISC 1–6 buttons to select the
			buttons to close the disc drawer and
	desired disc on the tray for playback.
			play the selected disc automatically.

14