Integra DPC-6.1 instruction manual Advanced Settings, Setting Procedure

Advanced Settings

The DPC-6.1 contains a lot more functions than have been covered so far. Most of these functions can only be accessed via the on-screen menu. Please note that not all available functions apply to all disc types supported by the DPC-6.1. Setting the language, for instance, has no effect for audio CDs.

1	2	3
4	5	6
7	8	9
+10	0
REMOTE CONTROLLER		RC-426DV

SETUP

ENTER

RETURN

///

Setting Procedure
1		Switch on your TV set.
2	SETUP	Stop playback and press the SETUP
		button.
		The following on-screen menu appears:
		LANGUAGE
		On-Screen Language		ENG
		Disc Menu Language		ENG
		Audio Language		ENG
		Subtitle Language		---
3		Use the	/	buttons to select the
		menu heading (icon) that provides
		access to the desired function.
	ENTER	See the next page for an overview of
		the available functions. Here is what
		the icons stand for:
		Language-related settings.
		Picture-related settings.
		Audio output settings.
		Settings related to the on-screen menu
		function.
		General utility settings.

4		Use the / buttons to choose a
		function below the selected icon, and
	ENTER	confirm by pressing the ENTER button.

ENTER

5	Enter the desired value with the /
	buttons and confirm by pressing the
ENTER	ENTER button.

For the OPERATION function, you will also need the / buttons. The exact procedure will be explained in that section.

ENTER

6		Repeat steps 4 and 5 to change other
		settings.
7	SETUP	Press the SETUP button to switch off the
		on-screen menu.
		Press the RETURN button to return to
	RETURN	the previous display.

Note:

Though the SETUP button may also work during normal play- back, certain functions may not be accessible. In that case, a warning message is displayed. Stop playback and press SETUP again to be able to select the desired function.

32