Integra DPC-6.1 Connecting to an Amplifier Equipped with a DTS Decoder, Advanced, Pcm

Warnings

•If you connect to the digital input of an amplifier that does not have a Dolby Digital decoder or DTS decoder, set the DPC-6.1’s “Audio Out Select” function to “PCM.” Any other setting may damage your ears or speakers when using high volume levels.

•During playback of DTS-encoded audio CDs, excessive noise may be output from the ANALOG OUTPUTs. To avoid possible damage to your audio system, we recommend you either break the connection between the DVD Changer’s ANALOG OUTPUTs and the amplifier, or to only start playback of your DPC-6.1 after selecting the appropriate digital input source on your amplifier.

•DTS Digital Surround™ playback is only available if you connect an external 5.1-channel DTS Digital Surround™ decoder to a DIGITAL OUTPUT jack of the DVD Changer.

Connecting to an Amplifier Equipped with a DTS Decoder

Playback of DTS-encoded discs requires that you establish a digital connection with the amplifier. The selection of the DPC-6.1’s DIGITAL OUTPUT depends on the type of digital input provided on your amplifier. Use either the DIGITAL OUTPUT COAXIAL or OPTICAL connector. See the amplifier’s manual for details.

Getting Started

		VIDEO OUTPUT
	Y	PPS VIDEOVIDEO
		COMPONENT
	ANALOG	DIGITAL
	OUTPUT	OUTPUT
	L	COAXIAL OPTICAL
	R
Signal flow			Optical digital cable
75 Ω coaxial cable
Connection	To COAXIAL type		To OPTICAL type digital
	digital audio input		audio input

example

Amplifier equipped with a DTS decoder

Digital Theater System (DTS)

DTS is a high-quality surround technology used in movie theaters that is also available for home use on DVD videos or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit or 5.1-channel DTS encoded sound tracks.

• DTS functionality is only available when using DVD videos or audio CDs with DTS encoding.

• Make the following settings:
	Setting	Select:	Page
	Audio Out Select	Bitstream	36
	Recording system	DTS	29

Connections

Basic

Front speaker (left)

Center speaker

Surround speaker (left )

	Front
TV	speaker
	(right)

Sub- woofer

Surround

speaker (right )

• Select the DTS mode on your amplifier.

Digital Stereo Audio Playback

The DPC-6.1 also allows you to output a stereo audio signal in the digital domain. The selection of the DPC-6.1’s DIGITAL OUTPUT depends on the type of digital input provided on your amplifier. Use either the DIGITAL OUTPUT COAXIAL or OPTICAL connector. See the amplifier’s manual for details.

Playback

Advanced

Connecting to an Amplifier Equipped with a Digital Audio Input

VIDEO OUTPUT

Y	P	P	S VIDEO	VIDEO
	COMPONENT
ANALOG		DIGITAL
OUTPUT		OUTPUT
		COAXIAL	OPTICAL

L

R

Signal flow

75 Ω coaxial cable		Optical digital cable
Connection	To COAXIAL type	To OPTICAL type digital
	digital audio input	audio input

example

Amplifier equipped with a Digital Audio Input

Front	TV	Front
speaker		speaker
(left)		(right)

PCM

If your amplifier provides a digital audio input, you can establish a digital connection between the DPC-6.1 and the amplifier. Choose this type of connection if your amplifier is equipped with a better D/ A converter than your DPC-6.1, or if you also own a dedicated D/A converter.

• Make the following setting:

Setting	Select:	Page
Audio Out Select	PCM	36

Notes:

•NEVER connect a DIGITAL OUTPUT jack of the DVD Changer to the AC-3 RF input of a Dolby Digital Receiver. AC-3 RF inputs use a different encoding format that is not supported by the DPC-6.1’s DIGITAL OUTPUTs.

•The amplifier’s coaxial digital input may be labelled “DIGITAL” rather than “COAXIAL”. See its manual for details.

Playback Function Setup

Others

13