Kompernass KH 2370 operating instructions Connecting the antenna to the combination unit

Page 12

Connecting to a television by means of S-Video

Note:

For this connection variant, the television must have an S-Video input and two unassigned cinch jacks.

If you are not sure whether

•the television can use S-Video, then consult the operat- ing instructions of the television

•it has unassigned cinch jacks, then check this on the back of the television

To connect the combination unit by means of S-Video to the television:

1Plug in the S-Video cable into the jacks labelled S-Vid- eo of the combination unit.

2Plug in the other end of the S-Video cable in the S-Vid- eo jacks of the television.

3Plug in one cinch cable into the AUX IN L cinch jack of the combination unit.

4Plug in the other end of the cinch cable into the audio jack for the left channel on the television.

5Plug in another cinch cable into the AUX IN R cinch jack of the combination unit.

6Plug in the other end of this cinch cable into the audio jack for the right channel on the television.

7Set the television to the AV channel, which reproduc- es the S-Video signal. If you are not sure how to carry out these settings, then consult the operating instruc- tions of the television. In addition, check the operating instructions to see whether you have to carry out any further settings on the television.

Also look at the chapter “Setting video output” for more information on this subject.

Connecting to a television by means of video input (composite video)

If you would like to connect the combination unit to a tel- evision, which

•is not capable of using S-Video and

•does not have a scart jack, but has cinch jacks

then connect it by means of the video input (the so-called “composite video”–connection variant). To do this:

1Plug in the supplied cinch cable into the video jack of the combination unit.

2Plug in the other end of the cinch cable into the corre- sponding cinch jack of the television.

3Plug in one cinch cable into the AUX IN L cinch jack of the combination unit.

4Plug in the other end of the cinch cable into the audio jacks for the left channel on the television.

5Plug in another cinch cable into the AUX IN R cinch jack of the combination unit.

6Plug in the other end of this cinch cable into the audio jacks for the right channel on the television.

7Check the operating instructions whether any other possible settings are necessary on the television.

Connecting the antenna to the combination unit:

To pick up radio stations the combination unit has

•a dipole antenna for very high frequency (VHF/FM) broadcasting stations, which is firmly mounted on the back of the combination unit and

•a loop antenna for medium wave (AM) broadcasting stations, which is part of the scope of supply. First of all you have to connect this antenna to the combination unit.

1Lift the stand of the loop antenna, which has been folded inside, to the outside.

2Lock the plastic clips on the loop antenna into the slits on the stand. If you can hear that the plastic clips have locked into the slit, this means that the loop antenna has to be upright.

3Turn the combination unit around. On the back you will find a black double terminal labelled AM. Insert one lead of the antenna cables into each of the termi- nals. The medium wave antenna is now operational.

Connect the headphones to the combination unit

Plug in the jack plug of the headphones into the head- phones jack PHONES of the combination unit.

Connecting to digital audio components

If you have a Dolby Digital or DTS amplifier, then you can connect the combination unit to it. To do this, you need

12

KH 2370

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operating Instructions Page Technical Data IndexPreparing the combination unit for operation Initial operation of the combination unitUsing the combination unit Radio modeDVD/VCD/S-VCD mode Audio CD mode MP3/JPEG modeGlossary/Index Display shows No Disc, although a disc has been insertedTechnical Data Scope of supplyApplication and function Setting up the combination unit / Safety information Case of overheating there is also a fire riskControl elements, displays and connections On the unitOn the back of the combination unit On the front of the subwooferOn the remote control On the back of the surround loudspeakersRemote control Connecting the combination unit to a televisionConnecting to a television by means of a scart cable/RGB Preparing the combination unit for operationConnecting the antenna to the combination unit Connect the headphones to the combination unitConnecting to digital audio components Initial operation of the combination unit Positioning the surround loudspeakersOperating the OSD menu Setup Menu TV Display Normal/PS OSD Lang Normal/LB Scr Saver Wide MainMulti NtscPAL VideoSetting subtitle language Switching on/off disc navigation menuGeneral settings Set the language of the disc menuNORMAL/PS NORMAL/LBWide InfoCntr Delay Rear DelayCenter RearUsing the combination unit Other audio settingsSetting audio output Settings for mono VCDs/S-VCDsGeneral functions of the combination unit Using the sleep timer Switch on the childproof protectionChildproof protection Selecting your own password PG-PG-R NC-Radio mode Switching off the combination unitSaving radio station Improving the reception of AM/medium wave radio stationsDVD/VCD/S-VCD mode Functions when playing back a DVD, VCD or S-VCDPlaying back DVDs, VCDs or S-VCDs Calling up disc menu Menu Rapid search forwards/backwardsSlow motion playback forwards/ backwards Slow Frame by frame advance StepChange the angle of the camera Angle Showing/hiding subtitlesChanging playback language Showing disc informationAudio CD mode Functions when playing back audio CDsPlaying back of audio CDs Selecting a title using the number buttons Select titlesSkipping to the beginning of the title Skip Selecting passages of titles with time positionsMP3/JPEG mode Information on the Jpeg modeFunctions when playing back MP3/JPEG files Playback MP3/JPEG filesSelecting files with number buttons Only to play back MP Repeating sequences A-BOnly to play back Jpeg Rotating pictures Operating the Smart Navi menuSelecting playback mode Play Mode Changing folders If folders existIf no folders exist Folder Folder REPDisc Scan DiscSelecting playback mode SingleREP-ONE Programmed playback ProgramRemote control without function One or more functions cannot be switched onDisplay shows No Disc, although a disc has been inserted Inserted disc is not being played backGlossary/Index What are DVDs, VCDs and S-VCDs?What are titles and chapters? What are Scart, S-Video, composite video?Secam MPJpeg
Top Page Image Contents