![](/images/new-backgrounds/1262531/26253127x1.webp)
English
Basic Operations
Setting the Beat EQ | Adjusting the non fader output | |||
This unit are provided with 5 types of sound tone ef- | volume | |||
fects stored in memory. Select the one you prefer. | You can adjust the volume output from the unit’s | |||
∗ The factory default setting is “USER CUSTOM”. | ||||
non fader output terminal. | ||||
Each time you press the [BEQ] button, the tone | 1. | Press the [A] button and select | ||
effect changes in the following order: |
| VOL”. | ||
“BASS BOOST” | ➜ “IMPACT” ➜ “EXCITE” ➜ | 2. | Turning the [ROTARY] knob clockwise in- | |
“USER CUSTOM” ➜ “TONE BYPASS” ➜ |
| creases the output volume; turning it counter- | ||
“BASS BOOST” ... |
| clockwise decreases the output volume. | ||
• BASS BOOST | : bass emphasized |
| ∗ The factory default setting is “0”. (Setting | |
• IMPACT | : bass and treble empha- |
| range: | |
3. | When the adjustment is complete, press the | |||
| sized | |||
• EXCITE | : bass and treble empha- |
| [A] button several times until the function | |
|
|
sized mid | mode is reached. |
|
• USER CUSTOM : user custom
• TONE BYPASS : no sound effect
Adjusting the tone
Press the [A] button and select the item to ad- just. Each time you press the [A] button, the item changes in the following order:
●When “BASS BOOST” is set
●When “IMPACT” is set
●When “EXCITE” is set
●When “USER CUSTOM” is set
Adjusting the bass
The bass gain, bass F (center frequency) and bass Q can be adjusted as follows.
1.Press the [A] button and select “BASS <GAIN>”.
2.Press the [a] or [d] button and select from “BASS <GAIN>” ➜ “BASS <F 50>” ➜ “BASS <Q 1>” ➜ “BASS <GAIN>”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and adjust the gain, the F (center frequency) and the Q.
BASS GAIN :
BASS F : 50Hz/80Hz/120Hz (The fac- tory default setting is “50”)
BASS Q : 1/1.25/1.5/2 (The factory de- fault setting is “1”)
4.When the adjustment is complete, press the [A] button several times until the function mode is reached.
●When “TONE BYPASS” is set
∗Pressing the [BEQ] button for 1 second or longer while in “USER CUSTOM” sets flat, and displays a “BEQ FLAT” message.
Note:
•When the
Adjusting the MID
The MID gain, MID F (center frequency) and MID Q can be adjusted as follows.
1.Press the [A] button and select “MID <GAIN>“.
2.Press the [a] or [d] button and select from “MID <GAIN>” ➜ “MID <F 1k>” ➜ “MID <Q 2>” ➜ “MID <GAIN>”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and adjust the gain, the F (center frequency) and the Q.
MID GAIN :
14 DXZ825