Clarion DXZ825 Operations Common to Each Mode, AUX function Triggered audio mute for cellular

	Operations Common to Each Mode
AUX function	Triggered audio mute for cellular
This system has an external input jack so you	telepones
can listen to sounds and music from external	This unit requires special wiring to mute the au-
devices connected to this unit.
	dio signal automatically when a cellular tele-
	phone rings in the car.

English

Selecting AUX IN sensitivity

Make the following settings to select the sensi- tivity when sounds from external devices con- nected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “SENS MID”.

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button and select “AUX SENS”.

3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and select from “SENS HIGH”, “SENS MID” or “SENS LOW”.

4.Press the [T] button to return to the previous mode.

Setting the clock

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “CLOCK”.

∗This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.

3.Press the [ ] button.

4.Press the [a] or [d] button to select the hour or the minute.

5.Turn the [ROTARY] knob clockwise or coun- terclockwise to set the correct time.

∗ The clock is displayed in 12-hour format.

6.Press the [ ] button to store the time into memory.

7.Press the [T] button to return to the previous mode.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is re- set. While setting the clock, if another button or operation is selected, the clock set mode is can- celed.

DXZ825 21