DSP Operations
Professional mode/P.EQ operations
P.EQ effect ON/OFF
While the “P.EQ” indication is lit in the display, the P.EQ effect is set to “ON”.
∗The factory default setting is “ON”.
1.Press the [A] button and select “P.EQ”.
2.Press the [D] button. “P.EQ” in the display is changed from blinking to lit or unlit.
∗When “P.EQ” is unlit, the P.EQ effect is set to OFF.
Note:
•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ operations” is not reflected in the music source.
Selecting a P.EQ menu
1.Press the [A] button and select “P.EQ”. “P.EQ” blinks in the display.
2.Press the [BND] button to select “BASC” (ba- sic). “BASC” is displayed in the function mode indication in the display.
3.Press one of the [DIRECT] buttons and se- lect the desired P.EQ menu.
∗To select the user memory, press the [BND] but- ton to select “USR” and press one of the [DI- RECT] buttons.
Editing/storing a P.EQ menu (User memory)
1.Select a P.EQ menu which you want to edit on the basis of.
2.Press and hold the [T] button for 1 second or longer.
3.Press the [a] or [d] button to select the item to be adjusted.
There are correction channel, correction band, selection of the center frequency, gain adjustment and selection of the
∗For details on each adjustment item, refer to the owner’s manual supplied with the DPH910.
4.Turn the [ROTARY] knob clockwise or counterclockwise to make the adjustment.
5.Repeat steps 3 to 4 to complete the adjust- ment and press the [T] button.
6.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the edited contents.
∗You can give a title to the user memory. For the inputting method of titles, refer to the sub- section “Entering titles” in section “Opera- tions common to each mode”.
Digital Radio / DAB Operations
DAB control function | English |
| |
When a CeNET cable is used to connect a DAB |
|
(DAH913 or DAH9500z) (sold separately), all |
|
functions can be operated. |
|
∗A Digital Radio (DAB) program can be received only in Canada.
Listening to the DAB station
1.Press the [FNC] button to select the DAB mode.
2.When the unit receives a DAB station, the display changes in the following order: Frequency channel ➜ service label
Switching displays
Press the [D] button for 1 second during the Main (service label) display to select Main (ser- vice label) or Sub (PTY).
Note:
•The display shown in the normal reception mode and the preset reception mode is the same when a DAB station is received.
3.When the unit does not receive a DAB sta- tion, the display changes in the following or- der:
–Normal reception mode–
–Preset reception mode–
Notes:
•The number of programmes and broadcasting times depend on the DAB stations.
•When the strength of DAB signals is weak, audio output is muted.
DXZ825 29