Clarion DXZ825 owner manual Error Displays, Error Display Cause Measure, Changer, Error H

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

	Error Display	Cause	Measure
	ERROR 2	A CD is caught inside the CD deck and is	This is a failure of CD deck’s mechanism
		not ejected.	and consult your store of purchase.
CD
	ERROR 3	A CD cannot be played due to scratches,	Replace with a non-scratched,
		etc.	non-warped-disc.
	ERROR 6	A CD is loaded upside-down inside the	Eject the disc then reload it properly.
		CD deck and does not play.
	ERROR 2	A CD inside the CD changer is not	This is a failure of CD changer’s
		loaded.	mechanism and consult your store of
changer			purchase.
	ERROR 3	A CD inside the CD changer cannot be	Replace with a non-scratched, non-
CD		played due to scratches, etc.	warped disc.
	ERROR 6	A CD inside the CD changer cannot be	Eject the disc then reload it properly.
		played because it is loaded upside-down.
	ERROR H	Displayed when the temperature in the	Lower the surrounding temperature and
		MD changer is too high and playback has	wait for a while to cool off MD changer.
		been stopped automatically.
	ERROR 2	An MD inside the MD changer is not	This is a failure of MD changer’s
		loaded.	mechanism and consult your store of
changer			purchase.
	ERROR 3	An MD inside the MD changer cannot be	Replace with a non-scratched, non-
MD
		played due to scratches, etc.	warped disc.
	ERROR 6	An MD inside the MD changer cannot be	Eject the disc then reload it properly.
		played because it is loaded upside-down.
		Displayed when a non-recorded MD is	Load a pre-recorded MD in the MD
		loaded in the MD changer.	changer.

If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.

English

DXZ825 35