Setting UP and Connecting, Battery Operation

Display Segment

SETTING UP AND CONNECTING

This Portable Docking System is designed to operate on 4 x 1.5V ‘AA’ (UM-3) batteries (Not included) or the included AC Adaptor. A Lithium battery (Included) is also required for the backup of the clock.

A.BATTERY OPERATION

For outdoor or portable use, install 4 brand new, good quality alkaline-type batteries. Remove the battery doors on bottom of the cabinet.

1.Check the polarities and install 4 “AA” size (UM-3) batteries correctly.

2.Replace the battery doors.

IMPORTANT:

i.Be sure that the batteries are installed correctly. Wrong polarity may damage the unit and void the warranty.

ii.For indoor use we recommend you remove all batteries and use the included AC adaptor.

BATTERY CARE

I.Do not mix old and new batteries.

II.Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)

batteries.

III.Replace the battery only with the same or equivalent type.

IV.	If the unit is not to be used for an extended period of time, remove the battery.
	Old or leaking battery can cause damage to the unit and may void the warranty.

V.Do not dispose batteries in fire. Batteries may leak or explode.

BATTERY REPLACEMENT

The batteries are weak and need to be replaced when the sound becomes distorted, the Lamp or the Display starts flashing. You need to replace all the exhausted