Jensen JiMS-182 owner manual AUX Operation, Tips for Best Reception

Page 7

1.Press the POWER/STANDBY button to turn the unit on.

2.Press the / BAND button to select AM or FM band as desired.

3.Briefly press the ALM.2/MEM+ or ALM.1/ MEM- Button to select the preset channels.

TIPS FOR BEST RECEPTION

1.Automatic tuning depends on the signal strength of the broadcasting station, so weak stations are sometimes skipped. Tune manually to find the weak stations. With stronger broadcast stations the tuner may stop before it reaches the station frequency or optimum reception. Tune manually for

the best reception.

2.The receiver has a built-in bar antenna. If AM reception is weak, slightly rotating or re-positioning the unit will usually improve the reception. Please also remove the iPod from the

docking bay as this will definitely improve the AM reception.

NOTE: For best AM reception, please completely unwrap the power adaptor cord and fully extend it keeping the adaptor as far from the radio as possible.

AUX OPERATION

You can play other music sources (iPod shuffle (1st and 2nd generation), MP3, CD or other digital audio player) through the speakers of JiMS-182 by connecting the AUX IN Jack to your external player’s LINE OUT jack or headphone jack.

1.Plug one end of the connection cord (Not included) into the AUX IN jack on the back of JiMS-182. Plug the other end of the cord into your external audio player, such as an iPod shuffle, CD, MP3 Player etc.

2.Power on JiMS-182 and the external player.

3.Press the FUNCTION Button to select the AUX mode.

4.Start playing your iPod shuffle, MP3, CD or other digital audio player.

5.Slowly adjust both the volume on JiMS-182 and the external device.

6.Press the EQ Button repeatedly to choose the desired equalizer effect.

7.Turn off the attached player when finish listening.

8.Press the POWER/STANDBY Button to turn JiMS-182 off and unplug the connection cord from the AUX IN jack.

iPod ADAPTORS

There are three iPod Adaptors included in the package. One for the iPod touch (2nd generation) and iPod nano 3rd generation and 4th generation.

7

Image 7
Contents Docking Digital Clock Radio Music System For iPod FCC Notice Important InstructionsProtect Your Furniture Important NotesLocation of Controls Battery Replacement Setting UP and ConnectingBattery Operation Battery CareActivating the Backup Function Setting the Current TimePress To Preset ChannelsTo Receive Preset Stations Tuner OperationTips for Best Reception AUX OperationTo remove/replace the iPod adapter Alarm OperationAlarm Time Setting To place the iPod adapterWake to iPod Setting Wakeup ModeWake to Alarm Wake to RadioSleep Operation Stopping the AlarmTurning the Lamp On/Off Troubleshooting Guide Care and MaintenanceGeneral SpecificationsTuner Section AccessoriesAudio Section JEN