For nano 3rd generation | For nano 4th generation For iTouch 2nd generation |
It is always recommended you use the adaptor that comes with your iPod first. This will help maximize a custom fit for your iPod when docked.
To place the iPod adapter
1.Select an adaptor and gently place it into the dock. Insert the hooks of the adaptor into the socket of the docking bay.
2.Carefully push forwards and press down the adaptor.
To remove/replace the iPod adapter
1.Gently remove your iPod upwards.
2.Push the iPod adapter backwards and gently pull upwards.
DOCKING YOUR iPod
1.Press the POWER/STANDBY Button to turn on the unit.
2.Press the FUNC. Button to select iPod mode.
3.Select a suitable adaptor (included) or use the one that comes with your iPod and insert it into the docking bay. Your iPod can now be inserted onto the docking connector by aligning the connector on the bottom of the iPod onto the connector in the docking bay.
Note : Please be careful when seating your iPod onto the dock to avoid damaging the
4.The iPod will start playing and charging automatically.
Note: The iPod will only charge when the
5.Adjust the sound level by pressing the / Buttons on the
| Note : The volume level cannot be adjusted using the volume control on your | |||
| iPod after being docked. | |||
6. | Press the | or | Buttons to skip to the previous or next song. | |
7. | Press and hold the | or | Buttons to | |
| playback. |
|
|
|
8.To remove the iPod from
9.To turn
ALARM OPERATION
Your
Alarm Time Setting
Note: Alarm time (s) can only be set in Power Off mode.
8