1 • Operation
Table
Table
|
|
|
|
| Dialing Mode | Procedure |
|
| Store and Send Dialing | (number to dial) + (routing code) + * |
|
|
|
|
|
| Memory Speed Dialing | * + (memory location) |
|
|
|
|
|
| Programming Speed Dial Memory | * (hold until beep) + (memory location) + |
|
| (The ability to program speed dial | (number to store) + (routing code) + * |
|
| numbers can be disabled by the dealer). |
|
|
| Redial Mode | * + * |
|
| Priority Call Overide | * + * (hold until beep) |
|
|
|
|
|
|
|
|
|
1.4.1Store And Send Dialing
This is the normal method of placing a telephone call.
a.Enter the telephone number, or subscriber ID number on the radio front panel numberic keypad.
b.Enter the routing code for the destination of the call.
c.Press the * key.
d.Hear a beep followed by the phone system signal- ling.
e.Wait for the called party to answer the call.
Example: To dial the telephone number
Landline 1, enter the following sequence:
6 3 3 8 8 9 9 1 *
Up to fourteen digit telephone numbers may be entered.
13