Motorola GP68 operation manual Originating a Call, Mobile Operator Call, Emergency Call

Model ST-865M3 SmarTrunk II™ Logic Board

1.3.5Mobile Operator Call

Routing code 9 calls the subscriber that is preprogrammed as the Mobile Operator. This functions as though the sub- scriber had used routing code 3 with the subscriber ID num- ber of the Mobile Operator. The Mobile Operator is pro- grammed by the System Operator/Manager.

1.3.6Emergency Call

Routing code 0 causes the ST-852M to access line 1 and dial the preprogrammed emergency phone number. The emer- gency phone number is programmed by the System Opera- tor/Manager.

See the ST-852M SmarTrunk II Digital Trunking Control- ler Manual for details on programming the emergency num- bers.

1.4Originating A Call

This section describes the advanced SmarTrunk II dialing methods. Dialing has an automatic five second time-out. If the time between pressing keys in a dialing sequence exceeds five seconds, the ST-865M3 times out. A low frequency beep will be heard and the dialing procedure must be restarted. To clear out previously entered data and restart dialing, press the # key.

A busy tone will be heard by the subscriber if connection is not possible. This can occur if a radio channel is not available, or if the subscriber unit is out of range. The subscriber must then retry the call at a later time, when within range and a radio channel is available.

12