About the temperature controls.

The temperature controls are preset in the factory at 5 for both the refrigerator and freezer compartments. Allow 24 hours for the temperature to stabilize to the preset settings.

Several adjustments may be required. Each time you adjust controls, allow 24 hours after each adjustment for the refrigerator to reach the setting you have selected.

Setting either or both controls to 0 stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

Control settings will vary based on personal preferences, usage and operating conditions and may require more than one adjustment.

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

Ambient Room Temperature Limits

This refrigerator is designed to operate in ambient temperatures specified by its Temperature Class, which is marked on the rating plate.

Temperature

Symbol

Ambient Temperature

Class

 

Maximum

Minimum

 

 

 

 

Extended-

 

 

 

Temperate

SN

32°C

10°C

Temperate

N

32°C

16°C

Subtropical

ST

38°C

18°C

Tropical

T

43°C

18°C

NOTE: Internal temperature may be affected by such factors as the location of the refrigerator, ambient temperature and frequency of door openings. Adjust temperature controls as required to compensate for these factors.

About TurboCool™.

How it Works

TurboCool rapidly cools the refrigerator compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

 

Once activated, the compressor will turn on

 

immediately and the fans will cycle on and off

 

at high speed as needed for eight hours. The

 

compressor will continue to run until the

 

refrigerator compartment cools to approximately

 

1°C, then it will cycle on and off to maintain

6

this setting. After 8 hours, or if TurboCool is

pressed again, the refrigerator compartment will return to the original setting.

How to Use

Press TurboCool. The TurboCool indicator light will come on.

After TurboCool is complete, the TurboCool indicator light will go out.

NOTES: The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during TurboCool, the fans will continue to run if they have cycled on.

Page 5 Page 7
Page 6
Image 6
GE 200D2600P031 operating instructions About TurboCool, How it Works, How to Use
Page 5 Page 7

200D2600P031 specifications

The GE 200D2600P031 is a state-of-the-art dynamic system that showcases the latest advancements in engineering and technology. Designed by General Electric, this model is a standout in the field of industrial applications, particularly suited for heavy-duty situations where reliability and performance are paramount.

One of the main features of the GE 200D2600P031 is its high efficiency. The system leverages cutting-edge energy conversion technologies, optimizing power usage while minimizing waste. This is particularly beneficial for industries looking to reduce operational costs and enhance sustainability efforts. The robust design allows it to operate efficiently under a variety of load conditions, making it an ideal choice for applications ranging from manufacturing to energy production.

Another notable characteristic is its integration of advanced control systems. The GE 200D2600P031 is equipped with intelligent algorithms that facilitate real-time monitoring and adjustments. This capability ensures that performance remains optimal, even amidst fluctuating operational demands. The control systems also enable predictive maintenance, which not only reduces downtime but also extends the lifespan of the equipment.

The GE 200D2600P031 further stands out with its modular architecture. This design allows for easy scalability and customization, accommodating specific needs of different applications. Users can seamlessly upgrade components as technology evolves, ensuring they stay at the forefront of industrial innovation without needing a complete system overhaul.

In terms of connectivity, the system is designed to integrate smoothly with existing industrial networks. Utilizing industry-standard protocols, the GE 200D2600P031 can communicate with various devices and systems, enhancing overall operational efficiency. This connectivity also paves the way for data collection and analysis, empowering industries to make informed decisions based on real-time data insights.

In summary, the GE 200D2600P031 embodies cutting-edge technology, exceptional efficiency, and adaptability, making it a premier choice for a wide range of industrial applications. With its focus on performance, reliability, and future-proofing, this model represents the pinnacle of engineering excellence in today's competitive landscape. Whether for optimizing energy usage, enhancing operational efficiency, or integrating with modern networks, the GE 200D2600P031 stands ready to meet the demands of tomorrow's industrial challenges.
Top Page Image Contents