GE 200D2600P031 Before you call for service…, Problem, Possible Causes, What To Do

Before you call for service…

Problem Possible Causes What To Do

Frequent “buzzing” Icemaker power switch is in the

soundon position, but the water supply to the refrigerator has not been connected.

•Set the power switch to the off position. Keeping it in the on position will damage the water valve.

Ice cubes have	Ice storage bin needs cleaning.	•Empty and wash bin. Discard old cubes.
odor/taste
	Food transmitting odor/taste	• Wrap foods well.
	to ice cubes.
	Interior of refrigerator	•See Care and cleaning.
	needs cleaning.
Small or hollow cubes	Water filter clogged.	•Replace filter cartridge with new cartridge or with plug.
Slow ice cube freezing	Door left open.	• Check to see if package is holding door open.
	Temperature control not set	•See About the controls.
	cold enough.
Cube dispenser does	Icemaker turned off or	• Turn on icemaker or water supply.
not work	water supply turned off.
	Ice cubes are frozen to	• Remove cubes.
	icemaker feeler arm.
	Irregular ice clumps in	• Break up with fingertip pressure and discard
	storage container.	remaining clumps.
		•Freezer may be too warm. Adjust the freezer control to a colder
		setting, one position at a time, until clumps do not form.
	Dispenser is LOCKED.	•Press and hold the LOCK CONTROL pad for 3 seconds.
Water has poor taste/odor	Water dispenser has not been	•Dispense water until all water in system is replenished.
	used for a long time.
Water in first glass	Normal when refrigerator	• Wait 24 hours for the refrigerator to completely
is warm	is first installed.	cool down.
	Water dispenser has not been	• Dispense water until all water in system is replenished.
	used for a long time.
	Water system has been drained.	•Allow several hours for replenished supply to chill.
Water dispenser does	Water supply line turned	• See Installing the water line.
not work	off or not connected.
	Water filter clogged.	• Replace filter cartridge or remove filter and install plug.
	Air may be trapped in the	•Press the dispenser arm for at least two minutes.
	water system.
	Dispenser is LOCKED.	•Press and hold the LOCK CONTROL pad for 3 seconds.
Water spurting from	Newly-installed filter cartridge.	•Run water from the dispenser for 3 minutes (about
dispenser		six liters).
Water is not dispensed	Water in reservoir is	•Call for service.
but icemaker is working	frozen.
	Refrigerator control setting	•Set to a warmer setting.
	is too cold.
No water or ice cube	Supply line or shutoff	• Call a plumber.
production	valve is clogged.
	Water filter clogged.	•Replace filter cartridge or remove filter and install plug.
	Dispenser is LOCKED.	•Press and hold the LOCK CONTROL pad for 3 seconds.

32