About the automatic icemaker.

A newly-installed refrigerator may take 12 to 24 hours to begin making ice.

Power

Switch

Icemaker

Green

Feeler Arm

Power Light

Shelf

Ice Drawer

Pull the upper freezer shelf straight out to access the icemaker. Always be sure to replace the shelf. The shelf can be used for storage.

Automatic Icemaker

The icemaker will produce seven cubes per cycle–approximately 100–130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.

To access the icemaker: Pull the shelf above the ice drawer straight out. Always be sure to replace the shelf.

If the refrigerator is operated before the water connection is made to the icemaker, set the power switch in the O position.

When the refrigerator has been connected to the water supply, set the power switch to the l position.

You will hear a buzzing sound each time the icemaker fills with water.

The icemaker will fill with water when it cools to –10°C. A newly-installed refrigerator may take 12 to 24 hours to begin making ice cubes.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the icemaker will stop producing ice. It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.

If ice cubes get stuck in the icemaker, the green power light will blink. To correct this, set the power switch to O and remove the cubes. Set the power switch to I to restart the icemaker. After the icemaker has been turned on again, there will be a delay of about 45 minutes before the icemaker resumes operation.

NOTE: In homes with lower-than-average water pressure, you may hear the icemaker cycle multiple times when making one batch of ice.

WARNING:Connect to potable water

supply only. Installation of the icemaker must be done by a qualified service technician.

Ice Storage Drawer

To access ice, pull the drawer forward.

To remove the drawer, pull it straight out and lift it past the stop location.

Ice Drawer

15

Page 14 Page 16
Page 15
Image 15
GE 200D2600P031 operating instructions About the automatic icemaker, Automatic Icemaker, Ice Storage Drawer
Page 14 Page 16

200D2600P031 specifications

The GE 200D2600P031 is a state-of-the-art dynamic system that showcases the latest advancements in engineering and technology. Designed by General Electric, this model is a standout in the field of industrial applications, particularly suited for heavy-duty situations where reliability and performance are paramount.

One of the main features of the GE 200D2600P031 is its high efficiency. The system leverages cutting-edge energy conversion technologies, optimizing power usage while minimizing waste. This is particularly beneficial for industries looking to reduce operational costs and enhance sustainability efforts. The robust design allows it to operate efficiently under a variety of load conditions, making it an ideal choice for applications ranging from manufacturing to energy production.

Another notable characteristic is its integration of advanced control systems. The GE 200D2600P031 is equipped with intelligent algorithms that facilitate real-time monitoring and adjustments. This capability ensures that performance remains optimal, even amidst fluctuating operational demands. The control systems also enable predictive maintenance, which not only reduces downtime but also extends the lifespan of the equipment.

The GE 200D2600P031 further stands out with its modular architecture. This design allows for easy scalability and customization, accommodating specific needs of different applications. Users can seamlessly upgrade components as technology evolves, ensuring they stay at the forefront of industrial innovation without needing a complete system overhaul.

In terms of connectivity, the system is designed to integrate smoothly with existing industrial networks. Utilizing industry-standard protocols, the GE 200D2600P031 can communicate with various devices and systems, enhancing overall operational efficiency. This connectivity also paves the way for data collection and analysis, empowering industries to make informed decisions based on real-time data insights.

In summary, the GE 200D2600P031 embodies cutting-edge technology, exceptional efficiency, and adaptability, making it a premier choice for a wide range of industrial applications. With its focus on performance, reliability, and future-proofing, this model represents the pinnacle of engineering excellence in today's competitive landscape. Whether for optimizing energy usage, enhancing operational efficiency, or integrating with modern networks, the GE 200D2600P031 stands ready to meet the demands of tomorrow's industrial challenges.
Top Page Image Contents