About the temperature controls

on CustomCoolmodels. (for other models, see next page)

The temperature controls are preset in the factory at 3°C for the refrigerator compartment and -18°Cfor the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.

Setting either or both controls to 0 (off) stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

To change the temperature, press and release the + or pad. The SET light will come on and the display will show the set temperature. To change the temperature, tap either the + or pad until the desired temperature is displayed. Refrigerator temperatures can be adjusted between 1°C and 7°C and the freezer temperatures can be adjusted between –21°C and –14°C.

Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 5 seconds. Several adjustments may be required. Each time you adjust controls, allow 24 hours for the refrigerator to reach the temperature you have set.

To turn the cooling system off, tap the + pad for either the refrigerator or the freezer until the display shows

0 (off). To turn the unit back on, press the pad for either the refrigerator or freezer. The SET light will illuminate on the side you selected. Then press the pad again (on the side where the SET light is illuminated) and it will go to the preset points of –18°Cfor the freezer and 3°C for the refrigerator. Setting either or both controls to 0 (off) stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

Ambient Room Temperature Limits

This refrigerator is designed to operate in ambient temperatures specified by its Temperature Class, which is marked on the rating plate.

Temperature

Symbol

Ambient Temperature

Class

 

Maximum

Minimum

 

 

 

 

Extended-

 

 

 

Temperate

SN

32°C

10°C

Temperate

N

32°C

16°C

Subtropical

ST

38°C

18°C

Tropical

T

43°C

18°C

NOTE: Internal temperature may be affected by such factors as the location of the refrigerator, ambient temperature and frequency of door openings. Adjust temperature controls as required to compensate for these factors.

4

Page 4
Image 4
GE 200D2600P031 operating instructions About the temperature controls, Ambient Room Temperature Limits

200D2600P031 specifications

The GE 200D2600P031 is a state-of-the-art dynamic system that showcases the latest advancements in engineering and technology. Designed by General Electric, this model is a standout in the field of industrial applications, particularly suited for heavy-duty situations where reliability and performance are paramount.

One of the main features of the GE 200D2600P031 is its high efficiency. The system leverages cutting-edge energy conversion technologies, optimizing power usage while minimizing waste. This is particularly beneficial for industries looking to reduce operational costs and enhance sustainability efforts. The robust design allows it to operate efficiently under a variety of load conditions, making it an ideal choice for applications ranging from manufacturing to energy production.

Another notable characteristic is its integration of advanced control systems. The GE 200D2600P031 is equipped with intelligent algorithms that facilitate real-time monitoring and adjustments. This capability ensures that performance remains optimal, even amidst fluctuating operational demands. The control systems also enable predictive maintenance, which not only reduces downtime but also extends the lifespan of the equipment.

The GE 200D2600P031 further stands out with its modular architecture. This design allows for easy scalability and customization, accommodating specific needs of different applications. Users can seamlessly upgrade components as technology evolves, ensuring they stay at the forefront of industrial innovation without needing a complete system overhaul.

In terms of connectivity, the system is designed to integrate smoothly with existing industrial networks. Utilizing industry-standard protocols, the GE 200D2600P031 can communicate with various devices and systems, enhancing overall operational efficiency. This connectivity also paves the way for data collection and analysis, empowering industries to make informed decisions based on real-time data insights.

In summary, the GE 200D2600P031 embodies cutting-edge technology, exceptional efficiency, and adaptability, making it a premier choice for a wide range of industrial applications. With its focus on performance, reliability, and future-proofing, this model represents the pinnacle of engineering excellence in today's competitive landscape. Whether for optimizing energy usage, enhancing operational efficiency, or integrating with modern networks, the GE 200D2600P031 stands ready to meet the demands of tomorrow's industrial challenges.