Removing and replacing the doors | GE 200D2600P031 guide

Removing and replacing the doors.

When installing or moving the refrigerator, the doors may need to be removed in order to fit the refrigerator through a doorway.

Removing the Doors

Make sure the doors are closed and the refrigerator is unplugged.

Disconnect water line and wiring harness.

Near the lower hinge on the freezer side, push in on the collars at each end of the coupling, and pull the water line tubing from the coupling. Also, disconnect wiring harness. Pull the water line and the harness through the lower rail.

Wire Harness

Collars

Remove the hinge covers and the hinges.
In order to access the hinges, the hinge covers need to be
removed. Remove the cover by grasping it on the sides,
near the back of the cover. Push back on the cover and
lift up at the back, then the front.	Hinge Cover
	Hinge Cover
NOTE: DO NOT use a screwdriver to remove the cover. BE CAREFUL
not to break the rear retaining tab on the hinge cover. Remove the
hinges using a Torx T-20.
Remove the doors.
Carefully rotate the door to 90°. Guiding the disconnected
water line and wiring harness, lift the door straight up.

NOTE: Not lifting the door straight up may damage the bottom hinge.

Place doors on a protected surface.

NOTE: Be careful not to pinch the water tubing and the wire harness at the bottom of the door.

NOTE: Do not allow the connector to contact the floor. Hard contact can damage the connector. See “Replacing the Doors.”

Door

Replacing the Doors

Place doors on bottom hinges.

With the door at 90°, lower the door straight down onto the bottom hinge. Carefully close the door.

NOTE: Not lowering the door straight down onto the bottom hinge may damage the hinge.

NOTE: Do not allow the connector to contact the floor. Hard contact can damage the connector.

Replace top hinges and hinge covers.

Reinstall the top hinges using a Torx T-20. Replace the hinge covers. If the doors are not level, adjust the bottom right hinge with a 7/16″ open ended wrench.

Reconnect water line and wiring harness.

Insert water tubing back into coupling, making sure the tubing is pushed far enough into the coupling so that you no longer see the mark on the tubing. Reconnect the wiring harness.

Turn on the water supply and plug the refrigerator back in.

Hinge Pin

Connector

200D2600P031 specifications

The GE 200D2600P031 is a state-of-the-art dynamic system that showcases the latest advancements in engineering and technology. Designed by General Electric, this model is a standout in the field of industrial applications, particularly suited for heavy-duty situations where reliability and performance are paramount.

One of the main features of the GE 200D2600P031 is its high efficiency. The system leverages cutting-edge energy conversion technologies, optimizing power usage while minimizing waste. This is particularly beneficial for industries looking to reduce operational costs and enhance sustainability efforts. The robust design allows it to operate efficiently under a variety of load conditions, making it an ideal choice for applications ranging from manufacturing to energy production.

Another notable characteristic is its integration of advanced control systems. The GE 200D2600P031 is equipped with intelligent algorithms that facilitate real-time monitoring and adjustments. This capability ensures that performance remains optimal, even amidst fluctuating operational demands. The control systems also enable predictive maintenance, which not only reduces downtime but also extends the lifespan of the equipment.

The GE 200D2600P031 further stands out with its modular architecture. This design allows for easy scalability and customization, accommodating specific needs of different applications. Users can seamlessly upgrade components as technology evolves, ensuring they stay at the forefront of industrial innovation without needing a complete system overhaul.

In terms of connectivity, the system is designed to integrate smoothly with existing industrial networks. Utilizing industry-standard protocols, the GE 200D2600P031 can communicate with various devices and systems, enhancing overall operational efficiency. This connectivity also paves the way for data collection and analysis, empowering industries to make informed decisions based on real-time data insights.

In summary, the GE 200D2600P031 embodies cutting-edge technology, exceptional efficiency, and adaptability, making it a premier choice for a wide range of industrial applications. With its focus on performance, reliability, and future-proofing, this model represents the pinnacle of engineering excellence in today's competitive landscape. Whether for optimizing energy usage, enhancing operational efficiency, or integrating with modern networks, the GE 200D2600P031 stands ready to meet the demands of tomorrow's industrial challenges.

GE 200D2600P031 Removing and replacing the doors, Removing the Doors, Replacing the Doors

Models: 200D2600P031