GE 200D2600P031 Turn The Water On And Plug In The Refrigerator, Start The Icemaker, Power switch

Installation Instructions

2

TURN THE WATER ON AND PLUG IN THE REFRIGERATOR

Arrange the coil of tubing so that it does not vibrate against the back of the refrigerator or against the wall. Push the refrigerator back to the wall.

3START THE ICEMAKER

Set the icemaker power switch to the l position. The icemaker will not begin to operate until it reaches its operating temperature of –9°C or below. It will then begin operation automatically if the icemaker power switch is in the l position.

Power switch

NOTE: In lower water pressure conditions, the water valve may turn on up to 3 times to deliver enough water to the icemaker.

29