Installation Instructions

ROLLERS

The rollers have 3 purposes:

■Rollers adjust so the door closes easily when opened about halfway. [Raise the front about 5/8″ (16 mm) from the floor.]

■Rollers adjust so the refrigerator is firmly positioned on the floor and does not wobble.

■Rollers allow you to move the refrigerator away from the wall for cleaning.

Final leveling adjustments should be made after the refrigerator has been installed.

To adjust the rollers on 25′, 27′ and 29′ models:

■ Turn the roller adjusting screws clockwise to raise

the refrigerator, counterclockwise to lower it. Use a 3/8″ hex socket or wrench,

or an adjustable

wrench.

Roller adjusting screw

To adjust the rollers on 21′ and 23′ models:

Remove the base grille by opening the doors, removing the screws at each end, and pulling it straight out.

Turn the front roller adjusting screws clockwise to raise the refrigerator, counterclockwise to lower it. Use a 3/8″ hex socket or wrench, or an adjustable

wrench.

Roller adjusting screws

 

These models also have rear adjustable rollers so you can align the refrigerator with your kitchen cabinets. Use a long-handled 5/16″ socket wrench to turn the screws for the rear rollers–clockwise to raise the refrigerator, counterclockwise to lower it.

Replace the base grille.

DOOR ALIGNMENT

After leveling, make sure that the refrigerator door is 1/16″ higher than the freezer door.

To align the doors, adjust the refrigerator door.

Using a 7/16″ socket wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it. (A nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.)

After one or two turns of the wrench, open and close the refrigerator door and check the alignment at the top of the doors.

Refrigerator door needs to be raised.

To remove the base grille,

7/16″ Socket Wrench

open the doors, remove

 

the screw at each end of

 

the base grille and then

 

pull the grille straight out.

 

 

Raise

26

Page 25 Page 27
Page 26
Image 26
GE 200D2600P031 Door Alignment, Rollers have 3 purposes, To adjust the rollers on 25′, 27′ and 29′ models
Page 25 Page 27

200D2600P031 specifications

The GE 200D2600P031 is a state-of-the-art dynamic system that showcases the latest advancements in engineering and technology. Designed by General Electric, this model is a standout in the field of industrial applications, particularly suited for heavy-duty situations where reliability and performance are paramount.

One of the main features of the GE 200D2600P031 is its high efficiency. The system leverages cutting-edge energy conversion technologies, optimizing power usage while minimizing waste. This is particularly beneficial for industries looking to reduce operational costs and enhance sustainability efforts. The robust design allows it to operate efficiently under a variety of load conditions, making it an ideal choice for applications ranging from manufacturing to energy production.

Another notable characteristic is its integration of advanced control systems. The GE 200D2600P031 is equipped with intelligent algorithms that facilitate real-time monitoring and adjustments. This capability ensures that performance remains optimal, even amidst fluctuating operational demands. The control systems also enable predictive maintenance, which not only reduces downtime but also extends the lifespan of the equipment.

The GE 200D2600P031 further stands out with its modular architecture. This design allows for easy scalability and customization, accommodating specific needs of different applications. Users can seamlessly upgrade components as technology evolves, ensuring they stay at the forefront of industrial innovation without needing a complete system overhaul.

In terms of connectivity, the system is designed to integrate smoothly with existing industrial networks. Utilizing industry-standard protocols, the GE 200D2600P031 can communicate with various devices and systems, enhancing overall operational efficiency. This connectivity also paves the way for data collection and analysis, empowering industries to make informed decisions based on real-time data insights.

In summary, the GE 200D2600P031 embodies cutting-edge technology, exceptional efficiency, and adaptability, making it a premier choice for a wide range of industrial applications. With its focus on performance, reliability, and future-proofing, this model represents the pinnacle of engineering excellence in today's competitive landscape. Whether for optimizing energy usage, enhancing operational efficiency, or integrating with modern networks, the GE 200D2600P031 stands ready to meet the demands of tomorrow's industrial challenges.
Top Page Image Contents