Installation
Installation
To avoid serious injury or machine damage, all electrical connections need to be done by a qualified electrician in compliance with local codes.
Grounding
Ground the system as instructed within this manual.
The equipment must be grounded to reduce the risk of static sparking and electric shock. Electric or static sparking can cause fumes to ignite or explode.
Improper grounding can cause electric shock. Grounding provides an escape wire for the electric current.
1.Access the Platen
a.Perform Change Drums procedure in the
b.Perform Shutdown procedure in the Exact- aBlend AGP Advanced Glazing Proportioner,
c.Thoroughly clean all material that may be found on the top of the platen.
d.Turn off all sources of power to the machine.
6 | 332511A |