Operational Software Fatal System Errors
ERROR NAME | MESSAGE | CODE | DESCRIPTION |
|
|
|
|
RADC_PITD_ERROR | TRACKING | 200 | Personality tracking data error. |
RADC_PIHW_ERROR | PERSDATA | 201 | Personality hardware data error. |
RADC_FREQ_ERROR | FREQDATA | 202 | Personality frequency data error. |
RADC_PITD_MALLOC_ERROR | SOFTWARE | 203 | Personality tracking data malloc error. |
RADC_PITD_CKSUM_ERROR | SOFTWARE | 204 | Personality tracking data checksum error. |
DACS_NO_LOCK | NO LOCK | 300 | Synthesizer did not lock or became unlocked. Check the frequencies in the PC |
|
|
| programmer and |
DACS_MODEM_FATAL_ERROR | SOFTWARE | 301 | Unable to correctly configure the modem for EDACS operation. |
|
|
| the personality. |
DACS_RADC_FAILURE | SOFTWARE | 302 | Power cycle the radio. |
DACS_MODEM_RXOVR | SOFTWARE | 304 | Hardware Modem overflow. Power cycle the radio. |
DACS_MODEM_RXAVR | SOFTWARE | 305 | Power cycle the radio. |
CONV_RADC_ERROR | SOFTWARE | 400 | Error calling RADC function. Power cycle the radio. |
CONV_NOLOCK_ERROR | NO LOCK | 401 | Synthesizer became unlocked. check the frequencies in the PC programmer |
|
|
| and |
CONV_PUT_UIMSG_ERROR | SOFTWARE | 402 | UI message buffer not enabled. Power cycle the radio. |
CONV_MODEM_RXOVR | SOFTWARE | 403 | Conventional DIGV modem overflow. |
CONV_MODEM_RXAVR | SOFTWARE | 404 | Conventional DIGV modem underflow. |
CONV_MODEM_FATAL_ERROR | SOFTWARE | 405 | Unable to correctly configure the modem for conventional DIGV operation. |
CONV_PERS_ERROR | PERSDATA | 407 | Conventional personality error. |
PI_NOPERS_ERROR | PERSDATA | 500 | Personality data is not present. Program the personality. |
PI_CRC_ERROR | PERSDATA | 501 | Flash personality CRC did not match EEPROM. |
PI_DESC_CRC_ERROR | PERSDATA | 502 | Crucial personality data has incorrect CRC. |
PI_MALLOC_ERROR | SOFTWARE | 503 | Could not allocate memory to store crucial personality data. |
UI_FATAL_DEVICE_ERROR | PERSDATA | 600 | Input/Output device error. |
UI_FATAL_SWTO_ | SOFTWARE | 601 | Software memory error. |
MALLOC_ERROR |
|
|
|
UI_FATAL_SWTO_MAX_ERROR | SOFTWARE | 602 | Software error, power cycle the radio. |
UI_FATAL_WINDOW_MAX_ | SOFTWARE | 603 | Too many open windows. |
ERROR |
|
|
|
UI_FATAL_WINDOW_MALLOC_ | SOFTWARE | 604 | Software memory error. |
ERROR |
|
|
|
UI_FATAL_MESSAGE_INVPARM | SOFTWARE | 605 | Invalid parameter to UI_PUT_MESSAGE(). software error, report how error |
|
|
| was encountered. |
UI_FATAL_RI_MSGBUF_FULL | SOFTWARE | 606 | UI Task message buffer full error. Software error, report how error was |
|
|
| encountered. |
UI_FATAL_RISYS_MSGBUF_FULL | SOFTWARE | 607 | Radio Interface System (EDACS/CONV) task message buffer full. |
UI_FATAL_CI_MSGBUF_FULL | SOFTWARE | 608 | CI Task message buffer full. |
UI_FATAL_DEVICE_ | PERSDATA | 609 | I/O device type (from personality) not supported. |
NOTSUPPORTED |
|
|
|
UI_FATAL_AUXIO_MALLOC_ | SOFTWARE | 610 | Software memory error. |
ERROR |
|
|
|
UI_FATAL_NET_DEVICE_ERROR | SOFTWARE | 611 | Network I/O device error |
UI_FATAL_INVALID_CUID | SOFTWARE | 612 | CU ID is invalid or CU not connected. Insure that CU ID is CUA and DUAL |
|
|
| is disabled in personality. |
UI_FATAL_NO_TONE_DATA | SOFTWARE | 613 | No tone data is available in personality. |
UI_FATAL_UII0_MSGBUF_FULL | SOFTWARE | 614 | UI I/0 BBOS message buffer full. |
AEGIS_ADI_OVERFLOW | SOFTWARE | 801 | ADI Transmit event not serviced in time and buffer has overflown. |
AEGIS_RXBUF_MALLOC_ERROR | SOFTWARE | 802 | No memory available. |
AEGIS_KEYLOAD_MALLOC_ | SOFTWARE | 803 | No Keyloader table memory available. |
ERROR |
|
|
|
AEGIS_KEYLOAD_ERROR | SOFTWARE | 804 | General Keyload error has occurred. |
AEGIS_DATAMEM_MALLOC_ | SOFTWARE | 805 | No memory is allocated for data. |
ERROR |
|
|
|
AEGIS_KEYLOAD_NOTABL | SOFTWARE | 806 | No key table was found in EEPROM. |
22