Cobra Electronics MRHH325VP owner manual Memory Location Mode, To Program Memory Locations

Page 31

Operating Your Radio

MEM/ESC Button

Memory Location Number

Channel Up/Down Button

Channel Number

Advanced Operation

Memory Location Mode

Your radio has unlimited memory locations for storing your most frequently used channels. These memory locations can be selected individually or can be scanned. (See page 57 under Memory Location Scan.)

To enter Memory mode, press MEM/ESC button. The display will show the MEM icon and the Memory Channel bank will be activated and displayed.

To Program Memory Locations:

1.Press and hold the MEM/ESC button for two (2) seconds. The memory location number will start flashing and the MEM icon will be turned On.

2.Use the Channel Up/Down button to advance to the memory location (00-99) you want to program.

3.Press the MEM/ESC button to select the memory location. The memory channel number will stop flashing and the channel number will start flashing.

4.Use the Channel Up/Down button to change to the channel you want to store into the selected memory location.

5.Press the MEM/ESC button to program that channel. The memory location number will flash again.

Repeat steps 2 through 5 to program as many additional memories as you want.

6.Press and hold the MEM/ESC button for two (2) seconds. This will return the radio to Memory mode.

7.Press and release the MEM/ESC button again to return to Marine Standby mode.

Operating Your Radio

MEM Icon

Advanced Operation

To Recall a Stored Memory Location:

1.Press the MEM/ESC button. The MEM icon will be turned On.

2.Press the Channel Up/Down button to select the memory location. If a memory location has been programmed, its associated channel will display on the LCD. Your radio is now in Marine Standby mode on the selected memory location.

To Exit Memory Location Mode:

Press the MEM/ESC button to return the radio to Marine Standby mode. The last channel used in Marine Standby mode will now be displayed on the LCD and the MEM icon will disappear.

To Erase Stored Memory Locations:

1.Press and hold the MEM/ESC button for two (2) seconds. The memory location number will start flashing and the MEM icon will be turned On.

2.Use the Channel Up/Down button to advance to the memory location you want to erase.

3.Press the MEM/ESC button to select the memory location. The memory channel number will stop flashing and the channel number will start flashing.

4.Use the Channel Up/Down button to change to the channel to read “00” at the selected memory location.

5.Press the MEM/ESC button to erase that channel.

Repeat steps 2 through 5 to erase as many additional memories as you want.

6.Press and hold the MEM/ESC button for two (2) seconds. This will return the radio to Memory mode.

7.Press and release the MEM/ESC button again to return to Marine Standby mode.

54 English

Nothing Comes Close to a Cobra® 55

Image 31
Contents Customer Assistance For Assistance in the U.S.A Our Thanks to You Customer AssistanceFor Assistance Outside the U.S.A Backlit LCD Liquid Crystal Display Screen Radio Controls IndicatorsBacklit LCD Screen Product Features Product FeaturesUnlimited Memory Channels Roger Beep Tone Selectable Signal Strength MeterEmergency Weather Alert Speaker/Mic JackTable of Contents Safety Training Information Important Safety InformationImportant Safety Information Recommendations for Marine Communication Recommendations for Marine CommunicationFCC Licensing Information VHF Marine Radio Procedures Vessel Corsair is calling the vessel Vagabond Voice CallingVoice Calling Voice CallingRadiotelephone Calls Emergency Messages Distress ProcedureEmergency Messages and Distress Procedure Radiotelephone CallsMarine Distress Procedure Marine Emergency SignalsIf You Hear a Distress Call Emergency Messages and Distress Procedure VHF Marine Channel Assignments VHF Marine Channel Assignments International Distress, Safety and Calling03A Government Only 21A U.S. Government Only Canada Coast Guard Only 20A Port Operations Port Operations, Ship Movement23A Government Only Digital Selective Calling Voice communications not allowed 64A U.S. Government Only Canada Commercial Fishing81A U.S. Government Only Environmental Protection Operations Weather Frequency/Channel Noaa Weather Channels AlertNoaa Emergency Weather Alert Noaa Test Alert SystemAntenna, Wrist Strap Included in this PackageBelt Clip Initial Charge Batteries and ChargerBatteries and Charger Alkaline Batteries Maintaining the Battery ChargeGetting Started Power/Volume/Squelch Controls Power On/Off ControlGetting Started Common Radio FunctionsScan Button Backlight/Key Lock ButtonTo Toggle Between H-M-L Power Modes Setup Mode ProgrammingSetup Mode Programming High/Medium/Low H-M-L Power ButtonTo set VibrAlert VibrAlert ModeUSA/International/Canada Channel Maps To Set Channel Map Operating AreaStandby/Receive Transmit Call Tone ModeRoger Beep Mode Key Tone ModeTo Set WX Auto Search Scan On or Off Marine Standby and Receive Rx ModeStandby/Receive and Transmit To Set WX Alert On or OffTo Transmit a Message Transmit Tx ModeWeather WX Standby Mode WX Alert Standby ModeAdvanced Operation Channel 16/9 ModeAdvanced Operation Advanced Operation Tri-Watch ModeTri-Watch Setup To Program or Edit the Tri-Watch Channels Using Tri-Watch Tri-Watch Scan ModeTo Recall a Stored Memory Location Memory Location ModeTo Exit Memory Location Mode To Program Memory LocationsTo Enter Channel Scan Product FeaturesChannel Scan Mode Memory Location Scan ModeMaintenance Maintenance TroubleshootingTroubleshooting For Products Purchased Outside The U.S.A Warranty and Trademark Specifications AcknowledgementSpecifications Limited 3-Year Warranty For Products Purchased In The U.S.AAccessories Product ServiceAccessories