RIDGID R8408 manual Stereo/mono, Bass boost, Setting the clock, Fm only Bass Boost Hour h Minute m

Page 16

OPERATION

stereo/mono

See Figure 13.

Press the STEREO/MONO button located above the LCD display to select between stereo mode or mono mode.

This control functions in FM mode only. ST will be displayed when the radio is in stereo mode and only if the selected FM station is broadcasting in FM stereo.

MON will appear when the radio is in mono mode.

bass boost

See Figure 14.

Press the BB/SKIP button located above the LCD display to increase the bass. The bass level can be turned off or increased by three levels. The bass level will appear on the right side of the LCD display.

NOTE: The Bass Boost function cannot be used when the radio is in RACE mode.

Bass Boost is turned off when the button is pressed a fourth time.

setting the clock

See Figure 15.

The time appears on the LCD display when the radio is on, or when the radio is off and connected to a power source. The clock is set using the two small buttons located to the right of the LCD display.

Use a pointed object (such as an opened paper clip) to press the H button to set the hour and the M button to set the minute. Press the button once to move the time foward one number at a time. Press and hold the button to scroll quickly through the numbers. When the time is set, the colon ( : ) will blink on and off.

NOTE: This is a 12-hour clock without AM/PM designated.

STEREO MODE

(fm only)

Fig. 13

bass

boost

Fig. 14

HOUR (h)

MINUTE (m)

Fig. 15

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual Table of Contents IntroductionGeneral Safety Rules Important Safety Instructions Electrical SafetyPersonal Safety Heed ALL Warnings Follow ALL InstructionsSpecific Safety Rules ServiceSymbols Symbol Name DESIGNATION/EXPLANATIONCord Length Wire Size A.W.G ElectricalDouble Insulation Electrical ConnectionProduct Specifications FeaturesFCC Compliance Backlit LCD Display Race ScannerDigital Clock TOP Tray Squelch ControlProtective Steel Roll Cage Assembly OperationUnpacking Packing ListCharger and Battery Packs Sold Separately To install/REPLACE clock/MEMORY batteriesGeneral Usage Tips CordTo INSTALL/remove Battery Pack LatchesReceptacle Dc 1-amp ReceptacleWIRE-STYLE FM Antenna Optional Adjusting the volumeLCD display Turning the radio on/offManual tuning all modes Mode SelectionSeek/scan AM & FM Modes Storing a preset in Memory Direct tuneSetting the clock Stereo/monoBass boost Fm only Bass Boost Hour h Minute mNormal Scan and Preset Scan Modes Race Specific FeaturesPreset Scan Mode Clearing Race Presets To clear a preset Race channel from memorySkipping Frequencies and Presets Squelch controlUsing AN iPod with the Job-site radio/ race scanner 30-pin Connectors IPodLCD Displays UX 2 Mode Maintenance General MaintenanceBattery Pack Removal and Preparation for Recycling BatteriesTrackside Planner Driver/Car No Frequency PresetRace LOCATION/DATE Trackside Planner Warranty DAY Satisfaction Guarantee PolicyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredCustomer Service Information Model No R8408 Serial No
Top Page Image Contents