RIDGID R8408 manual Symbols, Symbol Name DESIGNATION/EXPLANATION

Page 5

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL

NAME

DESIGNATION/EXPLANATION

 

Wet Conditions Alert

Do not expose to rain or use in damp locations.

 

Read The Operator’s Manual

To reduce the risk of injury, user must read and understand

 

operator’s manual before using this product.

 

 

 

Eye Protection

Always wear safety goggles or safety glasses with side shields,

 

or a full face shield when operating this product.

 

 

 

Safety Alert

Precautions that involve your safety.

 

Electric Shock Alert

Indicates uninsulated material within the unit that may cause

 

electrical shock. Do not remove product covering.

 

 

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

 

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result

 

in death or serious injury.

 

 

 

 

 

 

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result

 

in death or serious injury.

 

 

 

 

 

 

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result in

 

minor or moderate injury.

 

 

 

 

 

 

CAUTION:

(Without Safety Alert Symbol) Indicates a situation that may result in property

 

damage.

 

 

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servicing, use only identical replacement parts.

WARNING:

To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call RIDGID® customer service for assistance.

SAVE THESE INSTRUCTIONS

Image 5
Contents OPERATOR’S Manual Introduction Table of ContentsElectrical Safety General Safety Rules Important Safety InstructionsPersonal Safety Heed ALL Warnings Follow ALL InstructionsService Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsElectrical Cord Length Wire Size A.W.GDouble Insulation Electrical ConnectionFCC Compliance FeaturesProduct Specifications Digital Clock Race ScannerBacklit LCD Display Protective Steel Roll Cage Squelch ControlTOP Tray Operation AssemblyUnpacking Packing ListTo install/REPLACE clock/MEMORY batteries Charger and Battery Packs Sold SeparatelyGeneral Usage Tips CordLatches To INSTALL/remove Battery PackReceptacle Dc 1-amp ReceptacleAdjusting the volume WIRE-STYLE FM Antenna OptionalLCD display Turning the radio on/offSeek/scan AM & FM Modes Mode SelectionManual tuning all modes Direct tune Storing a preset in MemoryStereo/mono Setting the clockBass boost Fm only Bass Boost Hour h Minute mPreset Scan Mode Race Specific FeaturesNormal Scan and Preset Scan Modes To clear a preset Race channel from memory Clearing Race PresetsSquelch control Skipping Frequencies and Presets30-pin Connectors IPod Using AN iPod with the Job-site radio/ race scannerLCD Displays UX 2 Mode General Maintenance MaintenanceBattery Pack Removal and Preparation for Recycling BatteriesRace LOCATION/DATE Driver/Car No Frequency PresetTrackside Planner Trackside Planner DAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredModel No R8408 Serial No Customer Service Information