Uniden uh065sx-2 Press Menu three times. PRI, Setting flashes, Press and hold Menu to

Page 18

UNIDEN Model uh065sx UHF CB Radio

OPERATION

Priority Channel

The feature allows user to monitor one of the 40 channels, monitoring it every 1.5 secs during Group Scanning. The Priority Channel can also be monitored with Dual Watch, see page 18.

Choosing a Priority Channel

1.Press MENU three times. PRI

ENT

setting flashes.

2.Press or to select the desired channel number or the OFF setting.

3.Press and hold MENU to

save and exit.

ENT

Programming Scan Channels

1.Select which Scanning Mode you wish to use on the channel OS or GS Mode.

OS is indicated by the absence of the GS icon.

2.Select the channel you want to store by pressing or .

MEM

3. Press DCS/CTCSS to store. MEM icon appears.

4. To remove the channel from Memory, Press MEM to

DCS/CTCSS

remove. MEM icon disappears.

17

uh065sx OM.indd Sec1:17

17/8/07 3:00:32 PM

Image 18
Contents Uh065sx uh065sx-2 Uh065sx OM.indd Sec11 17/8/07 30026 PM Contents Features IntroductionControls & Indicators Microphone Up Button Down Button Speaker Optional Accessories Included in Your Uh065sx PackTo install batteries Make sure your radio is OFF Getting StartedConnect the AC adaptor to the charging cradle Charging TimeBattery 100% full LevelsAlmost Empty LOW Battery Alert Icon indicates a fully powered unitSetting the Squelch Power ON/OFFVolume OperationTo Transmit and Receive Power of uh065sx is 2 WattsSelecting a Channel Press or to select the desired channelTo Operate in Duplex Mode Repeaters You can only activate Duplex on CH01-CH08Transmit Power Select TX Power Low TX Power MiddleScanning Example. CH40 becomes active When is pressed during To initiate scanningPress and hold Menu to Setting flashesPress Menu three times. PRI Select the channel you want to store by pressing orMonitor Display when activatedDual Watch To use monitorDCS Current DCS/CTCSS setting FlashesCtcss Select desired channel Press and hold MEM .TheRoom Monitor Current vox setting flashesVOX Press and hold Menu to save ExitTo select desired setting Room Monitor can be temporarily disabled by pressing orWhen is pressed momentarily Call ToneKEY Beep Busy Channel LockoutRoger Beep However, Roger Beep will not be heard from the speakerKeypad Lock Back LightingTo prevent accidental entries, you can lock Simplex Mode Duplex Mode UHF CB Channels & FrequenciesCtcss & DCS Code List Warranty Warranty only available in original country of purchaseUniden Australia Pty Limited/Uniden New Zealand Limited