Uniden UH036SX manual Selecting a Channel, To Transmit and Receive, Press channel, Desired channel

Page 6

SELECTING A CHANNEL

Press channel	or	to select the
desired channel.

TO TRANSMIT AND RECEIVE

ch/	dup	vol/
scan		mon
		mic

The UH036SX uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed on page 10.

1.	The transmit power of the
	UH036SX is 500mW which will	PTT
	provide a range of up to 3+Km.	PTT
2.	provide a range of up to 3+Km.	Switch
2.	Before you transmit, listen for
	activity on the selected channel.
3.	When the channel is clear, press and hold the
	to transmit. TX appears on the LCD.

ch/	dup	vol/
scan		mon
		mic

PTT

Hold the radio with microphone approximately 5 cm in front of your mouth with the antenna at approximately 45° angle away from your head. Speak in a clear, normal conversational voice.

4. When you have finished speaking,
release the PTT . TX then disappears on
the LCD. Listen for a response.	TX

While receiving, the RX icon is displayed.

5

Image 6

Contents Operating Guide Control & Indicators Included in Your UH036SX PackageMake sure your radio is off Remove the battery cover Battery WarningBattery Installation Replace the battery coverBelt Clip LOW Battery AlertWater Warning Slide the belt clip until it snaps into placeAdjusting the KEY Beeps Power ON/OFFVolume OperationPress channel Selecting a ChannelTo Transmit and Receive Desired channelRange Maximum Range Reduced RangeTo return to normal receive mode press Volume Once Automatic Squelch FeaturePress and hold Volume MonitorTo Operate in Duplex Mode ScanningStarts Press Channel DROP-OUT Delay Power SaveUHF Channels & Frequencies Warranty Uniden UH036SX UHF CB Radio