Uniden UH036SX manual Automatic Squelch Feature, Monitor, Press and hold Volume

Page 8

AUTOMATIC SQUELCH FEATURE

The UH036SX is equipped with an Automatic Squelch system which shuts off weak transmissions and unwanted noise.

MONITOR

This feature enables users to listen in for weak signals on the current channel at the press of a button.

To use monitor,		or	for 2 seconds. The RX
	Press and hold Volume
	icon will begin to flash.

For continuous listening. The receiver circuit will stay open, letting in both the noise & weak signals.

	To return to normal receive mode press Volume	or
	once.

7

Image 8

Contents Operating Guide Control & Indicators Included in Your UH036SX PackageBattery Warning Battery InstallationMake sure your radio is off Remove the battery cover Replace the battery coverLOW Battery Alert Water WarningBelt Clip Slide the belt clip until it snaps into place Power ON/OFF Volume Adjusting the KEY Beeps OperationSelecting a Channel To Transmit and ReceivePress channel Desired channelRange Maximum Range Reduced RangeAutomatic Squelch Feature Press and hold VolumeTo return to normal receive mode press Volume Once MonitorStarts Press Channel To Operate in Duplex ModeScanning DROP-OUT Delay Power SaveUHF Channels & Frequencies Warranty Uniden UH036SX UHF CB Radio