Uniden UH036SX manual DROP-OUT Delay, Power Save

Page 10

DROP-OUT DELAY

While scanning, the UH036SX stops at a busy channel and receives the transmission. When the received signal is over, the unit will wait for 2 seconds for the return of the signal, otherwise, the radio resumes scanning.

POWER SAVE

Your UH036SX has a unique circuit designed to dramatically extend the life of the batteries. If there is no transmission nor an incoming call within 2 seconds, your Radio switches to the Power Save mode. The Radio is still able to receive transmissions in this mode.

Image 10

Contents Operating Guide Control & Indicators Included in Your UH036SX PackageMake sure your radio is off Remove the battery cover Battery WarningBattery Installation Replace the battery coverBelt Clip LOW Battery AlertWater Warning Slide the belt clip until it snaps into placeAdjusting the KEY Beeps Power ON/OFFVolume OperationPress channel Selecting a ChannelTo Transmit and Receive Desired channelRange Maximum Range Reduced RangeTo return to normal receive mode press Volume Once Automatic Squelch FeaturePress and hold Volume MonitorScanning To Operate in Duplex ModeStarts Press Channel DROP-OUT Delay Power SaveUHF Channels & Frequencies Warranty Uniden UH036SX UHF CB Radio