Uniden UH036SX manual Water Warning, Belt Clip, LOW Battery Alert

Page 4

WATER WARNING

Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture.

BELT CLIP

To attach the belt clip:

Slide the belt clip until it snaps into place.

To remove the belt clip:

To remove the belt clip. Pinch and hold belt clip and latch (see arrows indicated) and slide the belt clip in the direction shown.

Pinch Belt Clip and Latch

LOW BATTERY ALERT

If the Battery level becomes low, the battery indicator icon will appear on

the LCD and begin flashing.

The unit will go into a Battery Low Mode. The Transmit Mode is disabled. Replace the batteries immediately to continue using the radio.

3

Image 4
Contents Operating Guide Control & Indicators Included in Your UH036SX PackageBattery Warning Battery InstallationMake sure your radio is off Remove the battery cover Replace the battery coverLOW Battery Alert Water WarningBelt Clip Slide the belt clip until it snaps into placePower ON/OFF VolumeAdjusting the KEY Beeps OperationSelecting a Channel To Transmit and ReceivePress channel Desired channelRange Maximum Range Reduced RangeAutomatic Squelch Feature Press and hold VolumeTo return to normal receive mode press Volume Once MonitorScanning To Operate in Duplex ModeStarts Press Channel DROP-OUT Delay Power SaveUHF Channels & Frequencies Warranty Uniden UH036SX UHF CB Radio