Uniden UH088sx manual Continuous Tone Coded Squelch System Ctcss

Page 18

UNIDEN UHF CB Transceiver

Operation

Continuous Tone Coded Squelch System (CTCSS)

This feature allows signals to be received only from callers who have selected the same CTCSS code.

Press or to select the desired channel to use CTCSS.

Press and hold for 2 seconds. CTCSS code flashes.

Pressor to select the desired CTCSS code 01 - 38.

Press once to store the new setting.

To turn CTCSS OFF please follow the above steps but select the desired CTCSS code oF (before code 01).

Channels 05 and 35 are Emergency Channels.

CTCSS cannot be selected on these channels.

If a button is not pressed within 10 seconds the uh088sx will automatically exit Select Mode.

16

Image 18
Contents CB Radio Page Contents Tables Controls/Indicators/Connections Uh088sxIndicators Connections Front Panel Features IntroductionFront Panel Layout Microphone Layout Included with your uh088sx CB radio Setting the Squelch OperationSelecting a Channel Operating the uh088sx in Duplex Mode Group Scan GS Mode Drop-out delay Choosing a Priority ChannelProgramming Scan Channels Firstly, activate scan mode by pressing Channel Seeking OperationContinuous Tone Coded Squelch System Ctcss Selective Calling Optional Selcall PCB Required OutlineTables TransmitWarranty ONE Year Limited WarrantyPage Page Uniden Australia Pty Limited / Uniden New Zealand Limited Uh064sx-2 Control & Indicators Battery Installation Getting StartedInstalling the Charge Cradle User Licence InformationLOW Battery Alert Belt ClipBack Light Adjusting the KEY Beeps Power ON/OFFVolume Roger BeepSelecting a Channel Automatic Squelch Feature MonitorScanning Operation with the aid of a Repeater Ctcss & DCS Press key to select the required Ctcss tone OFF orVOX Transmitting a Call TonePriority Scan Channel Scan Channel MemoryUHF CB Channels & Frequencies Ctcss & DCS Code List Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited