Uniden UH088sx manual Installing the Charge Cradle, User Licence Information

Page 28

INSTALLING THE CHARGE CRADLE

1.Plug the AC adaptor into the rear of the charge cradle and into the mains power.

2.Place the uh064sx into the charge cradle. The charge light will come on to indicate the unit is charging.

3.Before operating the uh064sx, charge the battery pack for 16 hours.

Do not charge alkaline or non rechargeable batteries.

USER LICENCE INFORMATION

The citizen band radio service is licenced in Australia by ACMA Radio-communications (Citizen Band Radio Stations) Class Licence and in New Zealand by MED General User Licence for Citizen Band Radio and operation is subject to conditions contained in those licences.

(3)

Image 28

Contents CB Radio Page Contents Tables Controls/Indicators/Connections Uh088sxIndicators Connections Front Panel Features IntroductionFront Panel Layout Microphone Layout Included with your uh088sx CB radio Setting the Squelch OperationSelecting a Channel Operating the uh088sx in Duplex Mode Group Scan GS Mode Drop-out delay Choosing a Priority ChannelProgramming Scan Channels Firstly, activate scan mode by pressing Channel Seeking OperationContinuous Tone Coded Squelch System Ctcss Selective Calling Optional Selcall PCB Required OutlineTables TransmitWarranty ONE Year Limited WarrantyPage Page Uniden Australia Pty Limited / Uniden New Zealand Limited Uh064sx-2 Control & Indicators Battery Installation Getting StartedInstalling the Charge Cradle User Licence InformationBelt Clip LOW Battery AlertBack Light Power ON/OFF VolumeAdjusting the KEY Beeps Roger BeepSelecting a Channel Monitor Automatic Squelch FeatureScanning Operation with the aid of a Repeater Ctcss & DCS Press key to select the required Ctcss tone OFF orVOX Transmitting a Call TonePriority Scan Channel Scan Channel MemoryUHF CB Channels & Frequencies Ctcss & DCS Code List Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited