Uniden UH088sx manual Automatic Squelch Feature, Monitor, Scanning

Page 32

AUTOMATIC SQUELCH FEATURE

The uh064sx is equipped with an Automatic Squelch System which shuts off weak transmissions and unwanted noise.

MONITOR

This feature enables users to listen for weak signals on the current channel at the press of a key.

To use monitor:

1. Press mon key. The ‘RX’ icon will flash.

2. Release within 1.5 seconds and the unit exits Monitor mode.

3.Press and hold mon key for 2 seconds for continuous listening.

The receiver circuit will stay open, letting in both the noise & weak signals. The ‘RX’ icon flashes in this status.

4.To return to normal Receive mode press mon key. The ‘RX’ icon disappears or stops flashing in this status.

SCANNING

The scan function scans all channels which are stored in the SCAN CHANNEL MEMORY and stops at an active channel. If a PRIORITY channel has been selected then this channel will be monitored for activity every 3 seconds. When the signal stops, the uh064sx waits 2 seconds (Reply Delay) before scanning resumes.

To initiate scanning;

1.

Press mem/SCN key momentarily to begin scanning.

2.

The ‘SCAN’ icon is displayed.

/call key to cancel.

Press select/ , mem/SCN or

txp

When scan stops at a busy channel, pressing ch/txp key will resume scan.

(7)

Image 32
Contents CB Radio Page Contents Tables Controls/Indicators/Connections Uh088sxIndicators Connections Front Panel Features IntroductionFront Panel Layout Microphone Layout Included with your uh088sx CB radio Setting the Squelch OperationSelecting a Channel Operating the uh088sx in Duplex Mode Group Scan GS Mode Drop-out delay Choosing a Priority ChannelProgramming Scan Channels Firstly, activate scan mode by pressing Channel Seeking OperationContinuous Tone Coded Squelch System Ctcss Selective Calling Optional Selcall PCB Required OutlineTables TransmitWarranty ONE Year Limited WarrantyPage Page Uniden Australia Pty Limited / Uniden New Zealand Limited Uh064sx-2 Control & Indicators Battery Installation Getting StartedInstalling the Charge Cradle User Licence InformationBack Light LOW Battery AlertBelt Clip Power ON/OFF VolumeAdjusting the KEY Beeps Roger BeepSelecting a Channel Scanning Automatic Squelch FeatureMonitor Operation with the aid of a Repeater Ctcss & DCS Press key to select the required Ctcss tone OFF orVOX Transmitting a Call TonePriority Scan Channel Scan Channel MemoryUHF CB Channels & Frequencies Ctcss & DCS Code List Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited