Uniden UH088sx manual Power ON/OFF, Volume, Adjusting the KEY Beeps, Roger Beep, Keylock ON/OFF

Page 30

OPERATION

POWER ON/OFF

1.

Press and hold select/

key to turn the radio on.

2.

A channel number will appear on the display.

Press and hold select/

key to turn the radio off.

VOLUME

1.Press or key to increase or decrease the volume level. ‘VOL’ icon appears on the display while volume is being adjusted.

There are 8 volume levels. Level 0 (No Audio) to Level 7 (Maximum Volume).

ADJUSTING THE KEY BEEPS

txp

Your radio emits a beep each time one of the keys (except for the PTT key) is pressed.

1. To turn OFF this beep: Press and hold /call key while turning on the radio.

2. To turn ON this beep: Press and hold /call key while turning on the radio.

ROGER BEEP

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT and VOX transmission.) Roger Beep can be heard through the speaker when Key Beep is on. Roger Beep is transmitted even if Key Beep is turned off.

However, Roger Beep will not be heard from the speaker.

1. To turn OFF Roger Beep: Press and hold key while turning on the radio.

2. To turn ON Roger Beep: Press and hold key while turning on the radio.

KEYLOCK ON/OFF

1.Press /call key for 1.5 seconds to enter keylock on mode.

2.Press /call key for 1.5 seconds while in Keylock mode to exit the Keylock mode.

While in Keylock on mode, the uh064sx can still receive and transmit.

(5)

Image 30
Contents CB Radio Page Contents Tables Controls/Indicators/Connections Uh088sxIndicators Connections Front Panel Features IntroductionFront Panel Layout Microphone Layout Included with your uh088sx CB radio Setting the Squelch OperationSelecting a Channel Operating the uh088sx in Duplex Mode Group Scan GS Mode Drop-out delay Choosing a Priority ChannelProgramming Scan Channels Firstly, activate scan mode by pressing Channel Seeking OperationContinuous Tone Coded Squelch System Ctcss Selective Calling Optional Selcall PCB Required OutlineTables TransmitWarranty ONE Year Limited WarrantyPage Page Uniden Australia Pty Limited / Uniden New Zealand Limited Uh064sx-2 Control & Indicators Battery Installation Getting StartedInstalling the Charge Cradle User Licence InformationLOW Battery Alert Belt ClipBack Light Adjusting the KEY Beeps Power ON/OFFVolume Roger BeepSelecting a Channel Automatic Squelch Feature MonitorScanning Operation with the aid of a Repeater Ctcss & DCS Press key to select the required Ctcss tone OFF orVOX Transmitting a Call TonePriority Scan Channel Scan Channel MemoryUHF CB Channels & Frequencies Ctcss & DCS Code List Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited