for the year. The day, date, and year will be automatically set once the WWVB signal is received. However, the day, date, and year can be manually set and will flash respectively in the DATE LCD during manual programming.
1.Press and hold the “SET” button for 3 seconds, or until “12h” or “24h” flashes in the DATE LCD.
2.Press and release the “SET” button 5 more times to reach the Weekday setting mode.
3.The weekday will be flashing in the DATE LCD.
4.Press and release the “CH” button to select the current weekday.
5.Press and release the “SET” button to confirm and to enter the
6.The
7.Press and release the “CH” button to select the current month.
8.Press and release the “SET” button to confirm the numeric- month, and to enter the
9.The
10.Press and release the “CH” button to select the current day.
11.Press and release the “SET” button to confirm and to enter the year setting mode.
12.The
13.Press and release the “CH” button to set the current year.
14.Press and release the “SET” button to confirm and to advance to the °F or °C setting mode.
F.Selecting °F or °C
1.Press and hold the “SET” button for 3 seconds, or until “12h” or “24h” flashes in the DATE LCD.
2.Press and release the “SET” button 9 times to reach the °F or °C setting mode.
3.“°F” is the default (factory) setting and should be flashing in the DATE LCD.
4.Press and release the “CH” button to toggle between °F and °C.
5.Press and release the “SET” button to confirm your selection and to advance to the LCD contrast setting.
10