La Crosse Technology WS-7078TWC instruction manual Snoozing and Stopping the Alarm

1.Press and hold the “AL1” button for 5 seconds or until the alarm-time display flashes in the DATE LCD.

2.Press and release the “IN” button to set the alarm hours.

3.Press and release the “OUT” button to set the alarm minutes.

4.Press and release the “AL1” button or wait 15 seconds for the unit to automatically confirm the alarm time and return to display the date in the DATE LCD as normal.

5.The ((1)) icon, appearing in the DATE LCD, indicates that the alarm is set to sound at the programmed time.

Note: Programming the alarm time automatically activates the alarm to sound at the programmed time.

6.To deactivate the alarm, press and release the “AL1” button (removing the ((1)) icon from the screen).

7.To reactivate the alarm press and release the “AL1” button.

8.After each activation or deactivation the programmed alarm time is displayed. Wait 15 seconds and the date will display in the DATE LCD again.

9.To set, activate, and deactivate alarm 2, follow the directions above for alarm 1—using the “AL2” button in place of the “AL1” button. The ((2)) icon will represent activation and deactivation of Alarm 2.

B.Snoozing and Stopping the Alarm

1.The snooze function is activated by pressing any one of the following buttons: “SET”, “IN”, “OUT” or “SNZ”.

2.To turn the alarm off completely, press any of the following buttons: “CH”, “AL1”, “AL2” or “DATE”.

3.The snooze function will last for 5 minutes before the alarm begins to sound again. Either the ((1)) or the ((2)) icon will flash during the snooze mode.

VI. Adding Remote Thermo/hygro Sensors (OPTIONAL)

16