5.Press and release the “SET” button to confirm your selection and advance to the Daylight Saving Time setting.
C.Daylight Saving Time(DST) Setting
1.Press and hold the “SET” button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD.
2.Press and release the “SET” button 2 times to reach the DST selection mode.
3.“DST 1” is the default (factory) setting and will be flashing in the DATE LCD.
4.Press and release the “CH” button to select “DST 0” or “DST 1.”
“DST 0” indicates that the feature is off and the indoor weather station will not change times at the daylight saving time changes automatically. “DST 1” indicates that the feature is on and the indoor weather station will change times at the daylight saving time changes automatically.
Note: Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time, and should select “DST 0.”
5.Press and release the “SET” button to confirm your selection and advance to the Time setting mode.
D.Time
There are two methods by which the time can be set:
1.Automatically via WWVB reception, or
2.Manually.
1.WWVB (Remote Control Time)
This method requires you to do nothing, except wait for the signal to be received and to select a time zone. Reception usually takes approximately
8