La Crosse Technology WS-7078TWC instruction manual Time Zone Setting, Haw

Page 7

2.Press and release the “CH” button to toggle between 12 and 24-hour time.

3.Press and release the “SET” button to confirm the 12/24-hour time setting and to advance to Time Zone Setting.

B.Time Zone Setting

The default time zone is EST, “-5hr” (Eastern Standard Time), to change this setting:

1.Press and hold the “SET” button for 3 seconds or until “12h” or “24h” flashes in the DATE LCD.

2.Press and release the “SET” button 1 time to enter the Time Zone setting mode.

3.The default Time Zone “-5” will flash in the DATE LCD.

4.Press and release the “CH” button to select your appropriate time zone. During selection of the Time Zone, the 3 letter abbreviations for the time zones found in North America will flash across the top of the TIME LCD. Observe the chart below showing the corresponding abbreviations, time zones, and codes.

TIME ZONES

 

GMT

0

 

Atlantic

-4

EST

Eastern

-5

CST

Central

-6

MST

Mountain

-7

PST

Pacific

-8

ALA

Alaska

-9

HAW

Hawaii

-10

Note: There are more time zones represented by numbers than there are represented by 3 letter abbreviations. If you live in North America you need only be concerned with the ones in the chart above.

7

Image 7
Contents WS-7078UF Wireless 433 MHz Radio-controlled Weather Station Detailed Set-Up Guide Table of ContentsInventory of Contents Do not Press ANY Buttons for 10 Minutes Quick SET-UP GuideRemote Thermo/hygro Sensor Detailed SET-UP Guide Battery InstallationIndoor Weather Station 12 or 24 Hour Time Setting Program ModeFunction Keys HAW Time Zone SettingWwvb Remote Control Time Daylight Saving TimeDST SettingTime Setting the Day, Date, and Year Manual Time SettingSelecting F or C Features of the WS-7078U Setting the LCD ContrastWeather Icons Weather ForecastWeather Tendency Arrows III. Outdoor Temperature and HumidityViewing the Indoor Temperature Records IV. Minimum and Maximum Temperature RecordsViewing the Outdoor Temperature Records Alarm Function Setting the Alarm Alarms 1 Resetting the Minimum and Maximum RecordsVI. Adding Remote Thermo/hygro Sensors Optional Snoozing and Stopping the AlarmViewing and Operating with Multiple Thermo/hygro Sensors Set-up of Multiple UnitsRemote Thermo/hygro Sensor A. Mounting With Screws MountingII. The Indoor Weather Station Mounting With Adhesive TapeTroubleshooting Using the Table StandWall Mounting Specifications Maintenance and Care InstructionsTemperature measuring range Dimensions L x W x H Power SupplyWarranty Information Support@lacrossetechnology.com