Mounting

by the “boxed” number), then press and release the “OUT” button.

3.Pressing and releasing the “OUT” button once will display the minimum temperature and the date and time the data was recorded. Pressing and releasing the “OUT” button a second time (while “MIN” is still displayed, otherwise press the button twice) will display the maximum temperature and the date and time the data was recorded.

4.To reset the Minimum/Maximum readings it is necessary to select which remote sensor you wish to reset. Press and hold the “OUT” button for 5 seconds and the records for the selected remote thermo/hygro sensor will be reset.

Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location. Also, extreme and sudden changes in temperature will decrease the accuracy of the indoor weather station. Changes in elevation will result with inaccurate weather forecasting for the next 12 to 24 hours. These changes will require a 12 to 24 hour wait before obtaining reliable data. To achieve a true temperature reading, avoid mounting where direct sunlight can reach the remote thermo/hygro sensor. We recommend that you mount the remote thermo/hygro sensor on a North-facing wall. The transmitting range of the remote thermo/hygro sensor is 80ft. Obstacles such as walls, concrete, and large metal objects can reduce the range. Place both units in their desired location and wait approximately 10 minutes before permanently mounting to ensure that there is proper reception. The indoor weather station should display a temperature in the OUTDOOR LCD within 4 minutes of setting up.

I.Remote Thermo/hygro Sensor A. Mounting With Screws

1.Remove the mounting bracket/receptor from the packaging.

2.Place the mounting bracket over the desired mounting surface.