La Crosse Technology instruction manual Specifications for WT-5721, Temperature, Power source

Page 14

SPECIFICATIONS FOR WT-5721

Temperature:

Measuring range:

32°F to 122°F with 0.2°F resolution (indoor)

 

-21.8°F to 140°F with 0.2°F resolution (outdoor)

 

(0°C to 50°C with 0.1°C resolution)

Checking intervals:

Every 10 seconds indoor, 3 times in 10 minutes for

 

remote temperature.

Power source:

 

AC Adapter (included)

Input: 120VAC/60Hz Output: DC 6V/100MA

Battery type:

Station: 2 x AA, 1.5V (Alkaline) (optional)

 

Sensor: 2 x AA, 1.5V (Alkaline)

Battery life:

Approximately 12 months, depending on projection

 

and backlight use

Dimensions (L x W x H):

5.25”W x 3.75”H x 1.25”L

14

Image 14
Contents WT-5721 433 MHz Radio Controlled Projection Alarm Table of Contents Inventory of Contents Features of Projection AlarmDo not Press ANY Buttons for 10 Minutes Quick SET-UP GuideProjection Alarm Programming Sequence III. Program ModeTime Zone Setting Function ButtonsTime Setting DST Daylight Saving Time SettingAdjustable Snooze Time Date Setting12/24-HOUR Setting RADIO-CONTROLLED Time and Date IV. Features & OperationsProjection of Time AND/OR Remote Temperature EL Backlight Indoor TemperatureRemote Temperature ACTIVATING/DEACTIVATING the Alarm Time AlarmSetting the Alarm Turning Alarm OFF While SoundingMounting with Screws Mounting the Remote Temperature SensorVI. Maintenance & Care Mounting with Adhesive TapeSolution TroubleshootingProblem Power source Specifications for WT-5721Temperature Dimensions L x W x HWarranty Information FCC ID OMO-01RX receiver OMO-01TX sensor