La Crosse Technology WT-5721 III. Program Mode, Programming Sequence, Function Buttons

III.PROGRAM MODE

To enter the Program Mode hold down the “SET” button for 1 second, until the time zone (“-5” default) flashes in the lower left. The Program Mode Guide is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the projection alarm. Complete programming is usually done for the initial set-up, and will require you to skip step 1 of programming sections III through VIII. Press and release the “SNOOZE” button at any time to exit the Program Mode, or wait approximately 15 seconds for the projection alarm to automatically return to normal operation.

A.PROGRAMMING SEQUENCE

1.Time Zone Setting

2.Daylight Saving Time ON/OFF

3.Adjustable Snooze

4.Hour Setting

5.Minute Setting

6.Year Setting

7.Month Setting

8.Date Setting

9.Day Setting

10.12/24-hour Mode

B.FUNCTION BUTTONS

There are 7 function buttons located on the front of the projection alarm and one on the top. The function buttons are labeled: ALM1/HOUR, ALM2/MIN, light intensity icon, DISPL, light direction icon, SET, MODE/+, and SNOOZE (the top bar).

C.TIME ZONE SETTING

PROJECTION

02'(



1.Hold down the “SET” button for 1 second, the time zone (“-5” default) will flash in the Date LCD.

2.Press and release the “+” button to select the appropriate time zone. There are 13 time zones to choose from (based relative to the international time standard of GMT (“Greenwich Mean Time).

3.From –5h to –8h, a US map with the highlighted time zone will also be displayed to the right of the time display.

4.Press and release the “SET” button to confirm the time zone setting, and to advance to DST (Daylight saving time) setting.

-4h	Atlantic Time
-5h	Eastern Time (default setting)
-6h	Central Time
-7h	Mountain Time
-8h	Pacific Time
-9h	Alaskan Time
-10h	Hawaiian Time
-11h, -12h	Next two time zones West of HAW
0h	Greenwich Mean Time
-1h, -2h, -3h	Three time zones West of GMT

6