La Crosse Technology WT-5721 instruction manual 12/24-HOUR Setting

Page 8

9.Press and release the “SET” button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display.

H.12/24-HOUR SETTING

Note: Setting to the 24 hour mode (also known as Military Time) will also change the temperature to display in °C instead of °F.

1.Hold down the “SET” button for 1 second (the selected time zone will flash), press and release the “SET” button 9 more times, until the “12” hour time display flashes in the time LCD.

2.Press and release the “+” button to toggle between 12 and 24 hour time.

3.Press and release the “SET” button to confirm the 12/24-hour time display, and to return to normal operation.

8

Image 8

Contents WT-5721 433 MHz Radio Controlled Projection Alarm Table of Contents Inventory of Contents Features of Projection AlarmDo not Press ANY Buttons for 10 Minutes Quick SET-UP GuideProjection Alarm III. Program Mode Time Zone SettingProgramming Sequence Function ButtonsDST Daylight Saving Time Setting Adjustable Snooze TimeTime Setting Date Setting12/24-HOUR Setting RADIO-CONTROLLED Time and Date IV. Features & OperationsProjection of Time AND/OR Remote Temperature EL Backlight Indoor TemperatureRemote Temperature Time Alarm Setting the AlarmACTIVATING/DEACTIVATING the Alarm Turning Alarm OFF While SoundingMounting the Remote Temperature Sensor VI. Maintenance & CareMounting with Screws Mounting with Adhesive TapeSolution TroubleshootingProblem Specifications for WT-5721 TemperaturePower source Dimensions L x W x HWarranty Information FCC ID OMO-01RX receiver OMO-01TX sensor