La Crosse Technology WS-7213U instruction manual Mounting Remote TEMP/HUMIDITY Sensor

Page 21

MOUNTING

Note: To achieve a true temperature reading, avoid mounting in direct sunlight. We recommend that you mount the remote temp/humidity sensor on an outside North- facing wall. The sending range is 80ft; obstacles such as walls, concrete, and large metal objects will reduce the range. Place both units in their desired location temporarily to test reception capability before permanently mounting.

A. REMOTE TEMP/HUMIDITY SENSOR

1.Remove the mounting bracket from the remote temp/humidity sensor

2.Mount using either screws or adhesive tape.

3.Reattach the remote temp/humidity sensor to the mounting bracket.

21

Image 21
Contents WS-7213U Wireless 433 MHz Weather Station Table of Contents Inventory of Contents Additional Equipment not included Do not Press ANY Buttons for 15 Minutes Quick SetupPage Page Press and release the SET button once more and you are done Battery Indoor Weather Station II. Setting the Time Features Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Weather Forecast Page Page Adding Additional Remote TEMP/HUMIDITY Sensors Optional Page Viewing and Operating With Multiple Remote Sensor Units Page Mounting Remote TEMP/HUMIDITY Sensor Weather Station Solution TroubleshootingPage Page Maintenance and Care Instructions Measuring Range Temperature SpecificationsRecommended Page Page Support@lacrossetechnology.com FCC Disclaimer WS-7034U Wireless 433 MHz Temperature Station Topic Philips screwdriver Fresh AAA 1.5V batteries Quick Setup Detailed Setup Guide Battery Installation Battery Cover II. Time Setting the Time IV. Features Minimum and Maximum Temperatures Adding Additional Remote Control Senders Optional Page Page Temperature Station Mounting Remote Control SenderProblem The LCD is faint Solution Maintenance and Care Instructions Measuring Temperatures Temperature check Page Page Support@lacrossetechnology.com FCC Disclaimer