La Crosse Technology WS-7213U Quick Setup, Do not Press ANY Buttons for 15 Minutes

Page 5

QUICK SETUP

Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.

1.Have the indoor weather station and remote temp/humidity sensor 3 to 5 feet apart.

2.Batteries should be out of all units for 10 minutes.

3.Place the batteries into the remote temp/humidity sensor first, then into the indoor weather station.

(All remote temp/humidity sensors must be started before the indoor weather station)

4.DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

5

Image 5
Contents WS-7213U Wireless 433 MHz Weather Station Table of Contents Inventory of Contents Additional Equipment not included Do not Press ANY Buttons for 15 Minutes Quick SetupPage Page Press and release the SET button once more and you are done Battery Indoor Weather Station II. Setting the Time Features Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Weather Forecast Page Page Adding Additional Remote TEMP/HUMIDITY Sensors Optional Page Viewing and Operating With Multiple Remote Sensor Units Page Mounting Remote TEMP/HUMIDITY Sensor Weather Station Solution TroubleshootingPage Page Maintenance and Care Instructions Measuring Range Temperature SpecificationsRecommended Page Page Support@lacrossetechnology.com FCC Disclaimer WS-7034U Wireless 433 MHz Temperature Station Topic Philips screwdriver Fresh AAA 1.5V batteries Quick Setup Detailed Setup Guide Battery Installation Battery Cover II. Time Setting the Time IV. Features Minimum and Maximum Temperatures Adding Additional Remote Control Senders Optional Page Page Temperature Station Mounting Remote Control SenderProblem The LCD is faint Solution Maintenance and Care Instructions Measuring Temperatures Temperature check Page Page Support@lacrossetechnology.com FCC Disclaimer