La Crosse Technology WS-7213U instruction manual II. Time Setting the Time

Page 39

II.TIME

A. SETTING THE TIME

1.Press and hold the SET button for 1

second. “12h” will appear in the TIME LCD.

2.Use the MIN/MAX button to select either 12h time (am/pm) or 24h time

3.Press the SET button 2 times, the hour will flash in the upper left corner.

4.Press the MIN/MAX button to set the hours, press the SET button, and press the MIN/MAX button to set the minutes.

5.Press the SET button to activate the clock.

Note: When in 12h mode, there is only a “PM” display, which appears under “TIME.” If there is no display here it is AM. Make sure you set the time accordingly.

5

Image 39
Contents WS-7213U Wireless 433 MHz Weather Station Table of Contents Inventory of Contents Additional Equipment not included Do not Press ANY Buttons for 15 Minutes Quick SetupPage Page Press and release the SET button once more and you are done Battery Indoor Weather Station II. Setting the Time Features Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Weather Forecast Page Page Adding Additional Remote TEMP/HUMIDITY Sensors Optional Page Viewing and Operating With Multiple Remote Sensor Units Page Mounting Remote TEMP/HUMIDITY Sensor Weather Station Solution TroubleshootingPage Page Maintenance and Care Instructions Measuring Range Temperature SpecificationsRecommended Page Page Support@lacrossetechnology.com FCC Disclaimer WS-7034U Wireless 433 MHz Temperature Station Topic Philips screwdriver Fresh AAA 1.5V batteries Quick Setup Detailed Setup Guide Battery Installation Battery Cover II. Time Setting the Time IV. Features Minimum and Maximum Temperatures Adding Additional Remote Control Senders Optional Page Page Temperature Station Mounting Remote Control SenderProblem The LCD is faint Solution Maintenance and Care Instructions Measuring Temperatures Temperature check Page Page Support@lacrossetechnology.com FCC Disclaimer