La Crosse Technology WS-7213U instruction manual Weather Station

Page 22

B. THE WEATHER STATION

1.The indoor weather station comes with the table stand already mounted. If you wish to use the table-stand, all that is required is to place the indoor weather station in your desired location.

2.To wall mount:

a)Remove the table stand by pulling down on the stand from the rear and rotating forward.

b)Fix a screw (not included) into the desired wall.

c)Place the indoor weather station onto the screw using the hanging hole on the backside.

d)Gently pull the indoor weather station down to lock the indoor weather station into place.

22

Image 22

Contents WS-7213U Wireless 433 MHz Weather Station Table of Contents Inventory of Contents Additional Equipment not included Quick Setup Do not Press ANY Buttons for 15 MinutesPage Page Press and release the SET button once more and you are done Battery Indoor Weather Station II. Setting the Time Features Minimum and Maximum Temperatures Resetting the Minimum and Maximum Temperatures Weather Forecast Page Page Adding Additional Remote TEMP/HUMIDITY Sensors Optional Page Viewing and Operating With Multiple Remote Sensor Units Page Mounting Remote TEMP/HUMIDITY Sensor Weather Station Troubleshooting SolutionPage Page Maintenance and Care Instructions Specifications Measuring Range TemperatureRecommended Page Page Support@lacrossetechnology.com FCC Disclaimer WS-7034U Wireless 433 MHz Temperature Station Topic Philips screwdriver Fresh AAA 1.5V batteries Quick Setup Detailed Setup Guide Battery Installation Battery Cover II. Time Setting the Time IV. Features Minimum and Maximum Temperatures Adding Additional Remote Control Senders Optional Page Page Mounting Remote Control Sender Temperature StationProblem The LCD is faint Solution Maintenance and Care Instructions Measuring Temperatures Temperature check Page Page Support@lacrossetechnology.com FCC Disclaimer